MAKEDEV-3.24-6.el6.x86_64
acl-2.2.49-6.el6.x86_64
aic94xx-firmware-30-2.el6.noarch
attr-2.4.44-7.el6.x86_64
audit-2.2-2.el6.x86_64
audit-libs-2.2-2.el6.x86_64
authconfig-6.1.12-10.el6.x86_64
basesystem-10.0-4.el6.noarch
bash-4.1.2-9.el6_2.x86_64
bfa-firmware-3.0.0.0-1.el6.noarch
binutils-2.20.51.0.2-5.34.el6.x86_64
bridge-utils-1.2-9.el6.x86_64
bzip2-1.0.5-7.el6_0.x86_64
bzip2-libs-1.0.5-7.el6_0.x86_64
ca-certificates-2010.63-3.el6_1.5.noarch
centos-release-6-3.el6.centos.9.x86_64
checkpolicy-2.0.22-1.el6.x86_64
chkconfig-1.3.49.3-2.el6.x86_64
coreutils-8.4-19.el6.x86_64
coreutils-libs-8.4-19.el6.x86_64
cpio-2.10-10.el6.x86_64
cracklib-2.8.16-4.el6.x86_64
cracklib-dicts-2.8.16-4.el6.x86_64
cryptsetup-luks-1.2.0-7.el6.x86_64
cryptsetup-luks-libs-1.2.0-7.el6.x86_64
curl-7.19.7-26.el6_2.4.x86_64
cyrus-sasl-lib-2.1.23-13.el6.x86_64
dash-0.5.5.1-3.1.el6.x86_64
db4-4.7.25-17.el6.x86_64
db4-utils-4.7.25-17.el6.x86_64
dbus-glib-0.86-5.el6.x86_64
dbus-libs-1.2.24-5.el6_1.x86_64
deltarpm-3.5-0.5.20090913git.el6.x86_64
device-mapper-1.02.74-10.el6.x86_64
device-mapper-event-1.02.74-10.el6.x86_64
device-mapper-event-libs-1.02.74-10.el6.x86_64
device-mapper-libs-1.02.74-10.el6.x86_64
device-mapper-multipath-0.4.9-56.el6_3.1.x86_64
device-mapper-multipath-libs-0.4.9-56.el6_3.1.x86_64
dhclient-4.1.1-31.0.1.P1.el6.centos.1.x86_64
dhcp-common-4.1.1-31.0.1.P1.el6.centos.1.x86_64
diffutils-2.8.1-28.el6.x86_64
dracut-004-284.el6_3.noarch
dracut-kernel-004-284.el6_3.noarch
dracut-network-004-284.el6_3.noarch
e2fsprogs-1.41.12-12.el6.x86_64
e2fsprogs-libs-1.41.12-12.el6.x86_64
efibootmgr-0.5.4-10.el6.x86_64
elfutils-libelf-0.152-1.el6.x86_64
ethtool-2.6.33-0.3.el6.x86_64
expat-2.0.1-11.el6_2.x86_64
fcoe-utils-1.0.22-3.el6.x86_64
file-5.04-13.el6.x86_64
file-libs-5.04-13.el6.x86_64
filesystem-2.4.30-3.el6.x86_64
findutils-4.4.2-6.el6.x86_64
fipscheck-1.2.0-7.el6.x86_64
fipscheck-lib-1.2.0-7.el6.x86_64
gamin-0.1.10-9.el6.x86_64
gawk-3.1.7-9.el6.x86_64
gdbm-1.8.0-36.el6.x86_64
glib2-2.22.5-7.el6.x86_64
glibc-2.12-1.80.el6_3.4.x86_64
glibc-common-2.12-1.80.el6_3.4.x86_64
gmp-4.3.1-7.el6_2.2.x86_64
gnupg2-2.0.14-4.el6.x86_64
gpg-pubkey-c105b9de-4e0fd3a3
gpgme-1.1.8-3.el6.x86_64
grep-2.6.3-3.el6.x86_64
groff-1.18.1.4-21.el6.x86_64
grub-0.97-77.el6.x86_64
grubby-7.0.15-3.el6.x86_64
gzip-1.3.12-18.el6.x86_64
hwdata-0.233-7.8.el6.noarch
info-4.13a-8.el6.x86_64
initscripts-9.03.31-2.el6.centos.x86_64
iproute-2.6.32-20.el6.x86_64
iptables-1.4.7-5.1.el6_2.x86_64
iptables-ipv6-1.4.7-5.1.el6_2.x86_64
iputils-20071127-16.el6.x86_64
iscsi-initiator-utils-6.2.0.872-41.el6.x86_64
kbd-1.15-11.el6.x86_64
kbd-misc-1.15-11.el6.noarch
kernel-2.6.32-279.5.2.el6.x86_64
kernel-2.6.32-279.el6.x86_64
kernel-firmware-2.6.32-279.5.2.el6.noarch
keyutils-1.4-4.el6.x86_64
keyutils-libs-1.4-4.el6.x86_64
kpartx-0.4.9-56.el6_3.1.x86_64
krb5-libs-1.9-33.el6_3.2.x86_64
less-436-10.el6.x86_64
libacl-2.2.49-6.el6.x86_64
libaio-0.3.107-10.el6.x86_64
libattr-2.4.44-7.el6.x86_64
libblkid-2.17.2-12.7.el6.x86_64
libcap-2.16-5.5.el6.x86_64
libcap-ng-0.6.4-3.el6_0.1.x86_64
libcgroup-0.37-4.el6.x86_64
libcom_err-1.41.12-12.el6.x86_64
libconfig-1.3.2-1.1.el6.x86_64
libcurl-7.19.7-26.el6_2.4.x86_64
libdrm-2.4.25-2.el6.x86_64
libedit-2.11-4.20080712cvs.1.el6.x86_64
libevent-1.4.13-4.el6.x86_64
libffi-3.0.5-3.2.el6.x86_64
libgcc-4.4.6-4.el6.x86_64
libgcrypt-1.4.5-9.el6_2.2.x86_64
libgpg-error-1.7-4.el6.x86_64
libgssglue-0.1-11.el6.x86_64
libhbaapi-2.2-14.el6.x86_64
libhbalinux-1.0.13-1.el6.x86_64
libidn-1.18-2.el6.x86_64
libnih-1.0.1-7.el6.x86_64
libnl-1.1-14.el6.x86_64
libpciaccess-0.12.1-1.el6.x86_64
libselinux-2.0.94-5.3.el6.x86_64
libselinux-utils-2.0.94-5.3.el6.x86_64
libsemanage-2.0.43-4.1.el6.x86_64
libsepol-2.0.41-4.el6.x86_64
libss-1.41.12-12.el6.x86_64
libssh2-1.2.2-11.el6_3.x86_64
libstdc++-4.4.6-4.el6.x86_64
libtirpc-0.2.1-5.el6.x86_64
libudev-147-2.42.el6.x86_64
libusb-0.1.12-23.el6.x86_64
libuser-0.56.13-5.el6.x86_64
libutempter-1.1.5-4.1.el6.x86_64
libuuid-2.17.2-12.7.el6.x86_64
libxml2-2.7.6-4.el6_2.4.x86_64
lldpad-0.9.43-20.el6_3.x86_64
logrotate-3.7.8-15.el6.x86_64
lua-5.1.4-4.1.el6.x86_64
lvm2-2.02.95-10.el6.x86_64
lvm2-libs-2.02.95-10.el6.x86_64
m4-1.4.13-5.el6.x86_64
mingetty-1.08-5.el6.x86_64
module-init-tools-3.9-20.el6.x86_64
ncurses-5.7-3.20090208.el6.x86_64
ncurses-base-5.7-3.20090208.el6.x86_64
ncurses-libs-5.7-3.20090208.el6.x86_64
net-tools-1.60-110.el6_2.x86_64
newt-0.52.11-3.el6.x86_64
newt-python-0.52.11-3.el6.x86_64
nfs-utils-1.2.3-26.el6.x86_64
nfs-utils-lib-1.1.5-4.el6.x86_64
nspr-4.9.1-2.el6_3.x86_64
nss-3.13.5-1.el6_3.x86_64
nss-softokn-3.12.9-11.el6.x86_64
nss-softokn-freebl-3.12.9-11.el6.x86_64
nss-sysinit-3.13.5-1.el6_3.x86_64
nss-tools-3.13.5-1.el6_3.x86_64
nss-util-3.13.5-1.el6_3.x86_64
openldap-2.4.23-26.el6_3.2.x86_64
openssh-5.3p1-81.el6.x86_64
openssh-clients-5.3p1-81.el6.x86_64
openssh-server-5.3p1-81.el6.x86_64
openssl-1.0.0-25.el6_3.1.x86_64
pam-1.1.1-10.el6_2.1.x86_64
passwd-0.77-4.el6_2.2.x86_64
pciutils-libs-3.1.4-11.el6.x86_64
pcre-7.8-4.el6.x86_64
pinentry-0.7.6-6.el6.x86_64
plymouth-0.8.3-24.el6.centos.x86_64
plymouth-core-libs-0.8.3-24.el6.centos.x86_64
plymouth-scripts-0.8.3-24.el6.centos.x86_64
policycoreutils-2.0.83-19.24.el6.x86_64
popt-1.13-7.el6.x86_64
procps-3.2.8-23.el6.x86_64
psmisc-22.6-15.el6_0.1.x86_64
pth-2.0.7-9.3.el6.x86_64
pygpgme-0.1-18.20090824bzr68.el6.x86_64
python-2.6.6-29.el6_2.2.x86_64
python-iniparse-0.3.1-2.1.el6.noarch
python-libs-2.6.6-29.el6_2.2.x86_64
python-pycurl-7.19.0-8.el6.x86_64
python-urlgrabber-3.9.1-8.el6.noarch
ql2100-firmware-1.19.38-3.1.el6.noarch
ql2200-firmware-2.02.08-3.1.el6.noarch
ql23xx-firmware-3.03.27-3.1.el6.noarch
ql2400-firmware-5.06.05-1.el6.noarch
ql2500-firmware-5.06.05-1.el6.noarch
readline-6.0-4.el6.x86_64
redhat-logos-60.0.14-12.el6.centos.noarch
rootfiles-8.1-6.1.el6.noarch
rpcbind-0.2.0-9.el6.x86_64
rpm-4.8.0-27.el6.x86_64
rpm-libs-4.8.0-27.el6.x86_64
rpm-python-4.8.0-27.el6.x86_64
rsyslog-5.8.10-2.el6.x86_64
sed-4.2.1-10.el6.x86_64
selinux-policy-3.7.19-155.el6_3.noarch
selinux-policy-targeted-3.7.19-155.el6_3.noarch
setup-2.8.14-16.el6.noarch
shadow-utils-4.1.4.2-13.el6.x86_64
slang-2.2.1-1.el6.x86_64
sqlite-3.6.20-1.el6.x86_64
system-config-firewall-base-1.2.27-5.el6.noarch
sysvinit-tools-2.87-4.dsf.el6.x86_64
tar-1.23-7.el6.x86_64
tcp_wrappers-libs-7.6-57.el6.x86_64
tzdata-2012c-3.el6.noarch
udev-147-2.42.el6.x86_64
upstart-0.6.5-12.el6.x86_64
ustr-1.0.4-9.1.el6.x86_64
util-linux-ng-2.17.2-12.7.el6.x86_64
vim-minimal-7.2.411-1.8.el6.x86_64
which-2.19-6.el6.x86_64
xfsprogs-3.1.1-7.el6.x86_64
xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
yum-3.2.29-30.el6.centos.noarch
yum-metadata-parser-1.1.2-16.el6.x86_64
yum-plugin-fastestmirror-1.1.30-14.el6.noarch
yum-presto-0.6.2-1.el6.noarch
zlib-1.2.3-27.el6.x86_64

rpm -qi [パッケージ]
の結果

Name : MAKEDEV Relocations: (not relocatable)
Version : 3.24 Vendor: CentOS
Release : 6.el6 Build Date: 2010年11月11日 06時37分37秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Base Source RPM: MAKEDEV-3.24-6.el6.src.rpm
Size : 227290 License: GPLv2
Signature : RSA/8, 2011年07月03日 13時44分39秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.lanana.org/docs/device-list/
Summary : A program used for creating device files in /dev
Description :
This package contains the MAKEDEV program, which makes it easier to create
and maintain the files in the /dev directory. /dev directory files
correspond to a particular device supported by Linux (serial or printer
ports, scanners, sound cards, tape drives, CD-ROM drives, hard drives,
etc.) and interface with the drivers in the kernel.

You should install the MAKEDEV package because the MAKEDEV utility makes
it easy to manage the /dev directory device files.

Name : acl Relocations: (not relocatable)
Version : 2.2.49 Vendor: CentOS
Release : 6.el6 Build Date: 2011年12月08日 01時53分55秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Base Source RPM: acl-2.2.49-6.el6.src.rpm
Size : 193226 License: GPLv2+
Signature : RSA/SHA1, 2011年12月09日 04時42分13秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://acl.bestbits.at/
Summary : Access control list utilities
Description :
This package contains the getfacl and setfacl utilities needed for
manipulating access control lists.

Name : aic94xx-firmware Relocations: (not relocatable)
Version : 30 Vendor: CentOS
Release : 2.el6 Build Date: 2010年11月11日 09時00分59秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: aic94xx-firmware-30-2.el6.src.rpm
Size : 30752 License: Redistributable, no modification permitted
Signature : RSA/8, 2011年07月03日 12時59分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.adaptec.com/en-US/speed/scsi/linux/aic94xx-seq-30-1_tar_gz.htm
Summary : Adaptec SAS 44300, 48300, 58300 Sequencer Firmware for AIC94xx driver
Description :
Adaptec SAS 44300, 48300, 58300 Sequencer Firmware for Open-Source AIC94xx
Driver.

Name : attr Relocations: (not relocatable)
Version : 2.4.44 Vendor: CentOS
Release : 7.el6 Build Date: 2011年09月24日 03時54分00秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Base Source RPM: attr-2.4.44-7.el6.src.rpm
Size : 142313 License: GPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時16分12秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://acl.bestbits.at/
Summary : Utilities for managing filesystem extended attributes
Description :
A set of tools for manipulating extended attributes on filesystem
objects, in particular getfattr(1) and setfattr(1).
An attr(1) command is also provided which is largely compatible
with the SGI IRIX tool of the same name.

Name : audit Relocations: (not relocatable)
Version : 2.2 Vendor: CentOS
Release : 2.el6 Build Date: 2012年06月22日 18時43分24秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: audit-2.2-2.el6.src.rpm
Size : 979444 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時17分26秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://people.redhat.com/sgrubb/audit/
Summary : User space tools for 2.6 kernel auditing
Description :
The audit package contains the user space utilities for
storing and searching the audit records generate by
the audit subsystem in the Linux 2.6 kernel.

Name : audit-libs Relocations: (not relocatable)
Version : 2.2 Vendor: CentOS
Release : 2.el6 Build Date: 2012年06月22日 18時43分24秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b8.bsys.dev.centos.org
Group : Development/Libraries Source RPM: audit-2.2-2.el6.src.rpm
Size : 173762 License: LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時19分55秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://people.redhat.com/sgrubb/audit/
Summary : Dynamic library for libaudit
Description :
The audit-libs package contains the dynamic libraries needed for
applications to use the audit framework.

Name : authconfig Relocations: (not relocatable)
Version : 6.1.12 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時37分26秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: authconfig-6.1.12-10.el6.src.rpm
Size : 1940040 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時19分19秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/authconfig
Summary : Command line tool for setting up authentication from network services
Description :
Authconfig is a command line utility which can configure a workstation
to use shadow (more secure) passwords. Authconfig can also configure a
system to be a client for certain networked user information and
authentication schemes.

Name : basesystem Relocations: (not relocatable)
Version : 10.0 Vendor: CentOS
Release : 4.el6 Build Date: 2010年11月11日 10時12分57秒
Install Date: 2012年08月26日 10時33分05秒 Build Host: c5b2.bsys.dev.centos.org
Group : System Environment/Base Source RPM: basesystem-10.0-4.el6.src.rpm
Size : 0 License: Public Domain
Signature : RSA/8, 2011年07月03日 13時00分48秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
Summary : The skeleton package which defines a simple Red Hat Enterprise Linux system
Description :
Basesystem defines the components of a basic Red Hat Enterprise Linux
system (for example, the package installation order to use during
bootstrapping). Basesystem should be in every installation of a system,
and it should never be removed.

Name : bash Relocations: (not relocatable)
Version : 4.1.2 Vendor: CentOS
Release : 9.el6_2 Build Date: 2012年05月11日 03時48分20秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6-x8664-build.centos.org
Group : System Environment/Shells Source RPM: bash-4.1.2-9.el6_2.src.rpm
Size : 3139166 License: GPLv3+
Signature : RSA/SHA1, 2012年05月10日 23時10分02秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/bash
Summary : The GNU Bourne Again shell
Description :
The GNU Bourne Again shell (Bash) is a shell or command language
interpreter that is compatible with the Bourne shell (sh). Bash
incorporates useful features from the Korn shell (ksh) and the C shell
(csh). Most sh scripts can be run by bash without modification.

Name : bfa-firmware Relocations: (not relocatable)
Version : 3.0.0.0 Vendor: CentOS
Release : 1.el6 Build Date: 2011年12月08日 05時35分54秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: bfa-firmware-3.0.0.0-1.el6.src.rpm
Size : 1330202 License: Redistributable, no modification permitted
Signature : RSA/SHA1, 2011年12月09日 04時44分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.brocade.com/sites/dotcom/services-support/drivers-downloads/CNA/Linux.page
Summary : Brocade Fibre Channel HBA Firmware
Description :
Brocade Fibre Channel HBA Firmware.

Name : binutils Relocations: (not relocatable)
Version : 2.20.51.0.2 Vendor: CentOS
Release : 5.34.el6 Build Date: 2012年06月22日 23時06分24秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b8.bsys.dev.centos.org
Group : Development/Tools Source RPM: binutils-2.20.51.0.2-5.34.el6.src.rpm
Size : 9814632 License: GPLv3+
Signature : RSA/SHA1, 2012年06月25日 07時17分24秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/binutils
Summary : A GNU collection of binary utilities
Description :
Binutils is a collection of binary utilities, including ar (for
creating, modifying and extracting from archives), as (a family of GNU
assemblers), gprof (for displaying call graph profile data), ld (the
GNU linker), nm (for listing symbols from object files), objcopy (for
copying and translating object files), objdump (for displaying
information from object files), ranlib (for generating an index for
the contents of an archive), readelf (for displaying detailed
information about binary files), size (for listing the section sizes
of an object or archive file), strings (for listing printable strings
from files), strip (for discarding symbols), and addr2line (for
converting addresses to file and line).

Name : bridge-utils Relocations: (not relocatable)
Version : 1.2 Vendor: CentOS
Release : 9.el6 Build Date: 2010年11月11日 11時06分21秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Base Source RPM: bridge-utils-1.2-9.el6.src.rpm
Size : 58263 License: GPLv2+
Signature : RSA/8, 2011年07月03日 13時06分13秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://bridge.sourceforge.net/
Summary : Utilities for configuring the linux ethernet bridge
Description :
This package contains utilities for configuring the linux ethernet
bridge. The linux ethernet bridge can be used for connecting multiple
ethernet devices together. The connecting is fully transparent: hosts
connected to one ethernet device see hosts connected to the other
ethernet devices directly.

Install bridge-utils if you want to use the linux ethernet bridge.

Name : bzip2 Relocations: (not relocatable)
Version : 1.0.5 Vendor: CentOS
Release : 7.el6_0 Build Date: 2011年06月25日 10時45分55秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b4.bsys.dev.centos.org
Group : Applications/File Source RPM: bzip2-1.0.5-7.el6_0.src.rpm
Size : 79087 License: BSD
Signature : RSA/8, 2011年07月06日 10時37分17秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.bzip.org/
Summary : A file compression utility
Description :
Bzip2 is a freely available, patent-free, high quality data compressor.
Bzip2 compresses files to within 10 to 15 percent of the capabilities
of the best techniques available. However, bzip2 has the added benefit
of being approximately two times faster at compression and six times
faster at decompression than those techniques. Bzip2 is not the
fastest compression utility, but it does strike a balance between speed
and compression capability.

Install bzip2 if you need a compression utility.

Name : bzip2-libs Relocations: (not relocatable)
Version : 1.0.5 Vendor: CentOS
Release : 7.el6_0 Build Date: 2011年06月25日 10時45分55秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: bzip2-1.0.5-7.el6_0.src.rpm
Size : 67592 License: BSD
Signature : RSA/8, 2011年07月06日 10時37分18秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.bzip.org/
Summary : Libraries for applications using bzip2
Description :

Libraries for applications using the bzip2 compression format.

Name : ca-certificates Relocations: (not relocatable)
Version : 2010.63 Vendor: CentOS
Release : 3.el6_1.5 Build Date: 2011年09月24日 04時39分46秒
Install Date: 2012年08月26日 10時33分05秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Base Source RPM: ca-certificates-2010.63-3.el6_1.5.src.rpm
Size : 1353134 License: Public Domain
Signature : RSA/SHA1, 2011年09月26日 13時17分03秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/
Summary : The Mozilla CA root certificate bundle
Description :
This package contains the set of CA certificates chosen by the
Mozilla Foundation for use with the Internet PKI.

Name : centos-release Relocations: (not relocatable)
Version : 6 Vendor: CentOS
Release : 3.el6.centos.9 Build Date: 2012年06月26日 18時30分11秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: centos-release-6-3.el6.centos.9.src.rpm
Size : 31523 License: GPLv2
Signature : RSA/SHA1, 2012年06月26日 18時04分48秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
Summary : CentOS release file
Description :
CentOS release files

Name : checkpolicy Relocations: (not relocatable)
Version : 2.0.22 Vendor: CentOS
Release : 1.el6 Build Date: 2010年11月11日 11時31分50秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b6.bsys.dev.centos.org
Group : Development/System Source RPM: checkpolicy-2.0.22-1.el6.src.rpm
Size : 870239 License: GPLv2
Signature : RSA/8, 2011年07月03日 13時06分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
Summary : SELinux policy compiler
Description :
Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

This package contains checkpolicy, the SELinux policy compiler.
Only required for building policies.

Name : chkconfig Relocations: (not relocatable)
Version : 1.3.49.3 Vendor: CentOS
Release : 2.el6 Build Date: 2012年06月22日 19時09分02秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: chkconfig-1.3.49.3-2.el6.src.rpm
Size : 670132 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時16分55秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
Summary : A system tool for maintaining the /etc/rc*.d hierarchy
Description :
Chkconfig is a basic system utility. It updates and queries runlevel
information for system services. Chkconfig manipulates the numerous
symbolic links in /etc/rc.d, to relieve system administrators of some
of the drudgery of manually editing the symbolic links.

Name : coreutils Relocations: (not relocatable)
Version : 8.4 Vendor: CentOS
Release : 19.el6 Build Date: 2012年06月22日 20時48分58秒
Install Date: 2012年08月26日 10時33分21秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: coreutils-8.4-19.el6.src.rpm
Size : 12847033 License: GPLv3+
Signature : RSA/SHA1, 2012年06月25日 07時19分26秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/coreutils/
Summary : A set of basic GNU tools commonly used in shell scripts
Description :
These are the GNU core utilities. This package is the combination of
the old GNU fileutils, sh-utils, and textutils packages.

Name : coreutils-libs Relocations: (not relocatable)
Version : 8.4 Vendor: CentOS
Release : 19.el6 Build Date: 2012年06月22日 20時48分58秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: coreutils-8.4-19.el6.src.rpm
Size : 5576 License: GPLv3+
Signature : RSA/SHA1, 2012年06月25日 07時18分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/coreutils/
Summary : Libraries for coreutils
Description :
Libraries for coreutils package.

Name : cpio Relocations: (not relocatable)
Version : 2.10 Vendor: CentOS
Release : 10.el6 Build Date: 2012年04月04日 00時18分57秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/Archiving Source RPM: cpio-2.10-10.el6.src.rpm
Size : 650337 License: GPLv3+
Signature : RSA/SHA1, 2012年04月04日 01時00分10秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/cpio/
Summary : A GNU archiving program
Description :
GNU cpio copies files into or out of a cpio or tar archive. Archives
are files which contain a collection of other files plus information
about them, such as their file name, owner, timestamps, and access
permissions. The archive can be another file on the disk, a magnetic
tape, or a pipe. GNU cpio supports the following archive formats: binary,
old ASCII, new ASCII, crc, HPUX binary, HPUX old ASCII, old tar and POSIX.1
tar. By default, cpio creates binary format archives, so that they are
compatible with older cpio programs. When it is extracting files from
archives, cpio automatically recognizes which kind of archive it is reading
and can read archives created on machines with a different byte-order.

Install cpio if you need a program to manage file archives.

Name : cracklib Relocations: (not relocatable)
Version : 2.8.16 Vendor: CentOS
Release : 4.el6 Build Date: 2011年06月25日 15時39分10秒
Install Date: 2012年08月26日 10時33分20秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: cracklib-2.8.16-4.el6.src.rpm
Size : 187265 License: LGPLv2+
Signature : RSA/8, 2011年07月06日 10時37分31秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/cracklib/
Summary : A password-checking library
Description :
CrackLib tests passwords to determine whether they match certain
security-oriented characteristics, with the purpose of stopping users
from choosing passwords that are easy to guess. CrackLib performs
several tests on passwords: it tries to generate words from a username
and gecos entry and checks those words against the password; it checks
for simplistic patterns in passwords; and it checks for the password
in a dictionary.

CrackLib is actually a library containing a particular C function
which is used to check the password, as well as other C
functions. CrackLib is not a replacement for a passwd program; it must
be used in conjunction with an existing passwd program.

Install the cracklib package if you need a program to check users'
passwords to see if they are at least minimally secure. If you install
CrackLib, you will also want to install the cracklib-dicts package.

Name : cracklib-dicts Relocations: (not relocatable)
Version : 2.8.16 Vendor: CentOS
Release : 4.el6 Build Date: 2011年06月25日 15時39分10秒
Install Date: 2012年08月26日 10時33分20秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: cracklib-2.8.16-4.el6.src.rpm
Size : 9327207 License: LGPLv2+
Signature : RSA/8, 2011年07月06日 10時37分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/cracklib/
Summary : The standard CrackLib dictionaries
Description :
The cracklib-dicts package includes the CrackLib dictionaries.
CrackLib will need to use the dictionary appropriate to your system,
which is normally put in /usr/share/dict/words. Cracklib-dicts also
contains the utilities necessary for the creation of new dictionaries.

If you are installing CrackLib, you should also install cracklib-dicts.

Name : cryptsetup-luks Relocations: (not relocatable)
Version : 1.2.0 Vendor: CentOS
Release : 7.el6 Build Date: 2012年06月22日 16時35分49秒
Install Date: 2012年08月26日 10時33分35秒 Build Host: c6b8.bsys.dev.centos.org
Group : Applications/System Source RPM: cryptsetup-luks-1.2.0-7.el6.src.rpm
Size : 302744 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時17分14秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://cryptsetup.googlecode.com/
Summary : A utility for setting up encrypted filesystems
Description :
This package contains cryptsetup, a utility for setting up
encrypted filesystems using Device Mapper and the dm-crypt target.

Name : cryptsetup-luks-libs Relocations: (not relocatable)
Version : 1.2.0 Vendor: CentOS
Release : 7.el6 Build Date: 2012年06月22日 16時35分49秒
Install Date: 2012年08月26日 10時33分29秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: cryptsetup-luks-1.2.0-7.el6.src.rpm
Size : 94442 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時18分57秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://cryptsetup.googlecode.com/
Summary : Cryptsetup shared library
Description :
This package contains the cryptsetup shared library, libcryptsetup.

Name : curl Relocations: (not relocatable)
Version : 7.19.7 Vendor: CentOS
Release : 26.el6_2.4 Build Date: 2012年03月28日 20時22分41秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/Internet Source RPM: curl-7.19.7-26.el6_2.4.src.rpm
Size : 354619 License: MIT
Signature : RSA/SHA1, 2012年03月28日 21時52分50秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://curl.haxx.se/
Summary : A utility for getting files from remote servers (FTP, HTTP, and others)
Description :
cURL is a tool for getting files from HTTP, FTP, FILE, LDAP, LDAPS,
DICT, TELNET and TFTP servers, using any of the supported protocols.
cURL is designed to work without user interaction or any kind of
interactivity. cURL offers many useful capabilities, like proxy support,
user authentication, FTP upload, HTTP post, and file transfer resume.

Name : cyrus-sasl-lib Relocations: (not relocatable)
Version : 2.1.23 Vendor: CentOS
Release : 13.el6 Build Date: 2011年12月08日 07時02分22秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: cyrus-sasl-2.1.23-13.el6.src.rpm
Size : 357710 License: BSD
Signature : RSA/SHA1, 2011年12月09日 04時53分13秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://asg.web.cmu.edu/sasl/sasl-library.html
Summary : Shared libraries needed by applications which use Cyrus SASL
Description :
The cyrus-sasl-lib package contains shared libraries which are needed by
applications which use the Cyrus SASL library.

Name : dash Relocations: (not relocatable)
Version : 0.5.5.1 Vendor: CentOS
Release : 3.1.el6 Build Date: 2010年08月19日 04時59分42秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b2.bsys.dev.centos.org
Group : System Environment/Shells Source RPM: dash-0.5.5.1-3.1.el6.src.rpm
Size : 127501 License: BSD
Signature : RSA/8, 2011年07月03日 13時09分16秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://gondor.apana.org.au/~herbert/dash/
Summary : Small and fast POSIX-compliant shell
Description :
DASH is a POSIX-compliant implementation of /bin/sh that aims to be as small as
possible. It does this without sacrificing speed where possible. In fact, it is
significantly faster than bash (the GNU Bourne-Again SHell) for most tasks.

Name : db4 Relocations: (not relocatable)
Version : 4.7.25 Vendor: CentOS
Release : 17.el6 Build Date: 2012年04月04日 22時42分16秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: db4-4.7.25-17.el6.src.rpm
Size : 1530375 License: Sleepycat and BSD
Signature : RSA/SHA1, 2012年04月05日 10時00分34秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.oracle.com/database/berkeley-db/
Summary : The Berkeley DB database library (version 4) for C
Description :
The Berkeley Database (Berkeley DB) is a programmatic toolkit that
provides embedded database support for both traditional and
client/server applications. The Berkeley DB includes B+tree, Extended
Linear Hashing, Fixed and Variable-length record access methods,
transactions, locking, logging, shared memory caching, and database
recovery. The Berkeley DB supports C, C++, Java, and Perl APIs. It is
used by many applications, including Python and Perl, so this should
be installed on all systems.

Name : db4-utils Relocations: (not relocatable)
Version : 4.7.25 Vendor: CentOS
Release : 17.el6 Build Date: 2012年04月04日 22時42分16秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/Databases Source RPM: db4-4.7.25-17.el6.src.rpm
Size : 415046 License: Sleepycat and BSD
Signature : RSA/SHA1, 2012年04月05日 10時00分34秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.oracle.com/database/berkeley-db/
Summary : Command line tools for managing Berkeley DB (version 4) databases
Description :
The Berkeley Database (Berkeley DB) is a programmatic toolkit that
provides embedded database support for both traditional and
client/server applications. Berkeley DB includes B+tree, Extended
Linear Hashing, Fixed and Variable-length record access methods,
transactions, locking, logging, shared memory caching, and database
recovery. DB supports C, C++, Java and Perl APIs.

Name : dbus-glib Relocations: (not relocatable)
Version : 0.86 Vendor: CentOS
Release : 5.el6 Build Date: 2010年11月11日 13時22分35秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: dbus-glib-0.86-5.el6.src.rpm
Size : 579827 License: AFL and GPLv2+
Signature : RSA/8, 2011年07月03日 13時09分33秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.freedesktop.org/software/dbus/
Summary : GLib bindings for D-Bus
Description :

D-Bus add-on library to integrate the standard D-Bus library with
the GLib thread abstraction and main loop.

Name : dbus-libs Relocations: (not relocatable)
Version : 1.2.24 Vendor: CentOS
Release : 5.el6_1 Build Date: 2011年09月24日 00時48分08秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: dbus-1.2.24-5.el6_1.src.rpm
Size : 265696 License: GPLv2+ or AFL
Signature : RSA/SHA1, 2011年09月26日 13時17分33秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.freedesktop.org/software/dbus/
Summary : Libraries for accessing D-BUS
Description :
This package contains lowlevel libraries for accessing D-BUS.

Name : deltarpm Relocations: (not relocatable)
Version : 3.5 Vendor: CentOS
Release : 0.5.20090913git.el6 Build Date: 2010年08月21日 15時40分23秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Base Source RPM: deltarpm-3.5-0.5.20090913git.el6.src.rpm
Size : 192738 License: BSD
Signature : RSA/8, 2011年07月03日 13時09分49秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://gitorious.org/deltarpm/deltarpm
Summary : Create deltas between rpms
Description :
A deltarpm contains the difference between an old
and a new version of a rpm, which makes it possible
to recreate the new rpm from the deltarpm and the old
one. You don't have to have a copy of the old rpm,
deltarpms can also work with installed rpms.

Name : device-mapper Relocations: (not relocatable)
Version : 1.02.74 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時28分29秒
Install Date: 2012年08月26日 10時33分27秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Base Source RPM: lvm2-2.02.95-10.el6.src.rpm
Size : 166674 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時19分08秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/dm
Summary : Device mapper utility
Description :
This package contains the supporting userspace utility, dmsetup,
for the kernel device-mapper.

Name : device-mapper-event Relocations: (not relocatable)
Version : 1.02.74 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時28分29秒
Install Date: 2012年08月26日 10時33分29秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Base Source RPM: lvm2-2.02.95-10.el6.src.rpm
Size : 31235 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時18分26秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/lvm2
Summary : Device-mapper event daemon
Description :
This package contains the dmeventd daemon for monitoring the state
of device-mapper devices.

Name : device-mapper-event-libs Relocations: (not relocatable)
Version : 1.02.74 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時28分29秒
Install Date: 2012年08月26日 10時33分27秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: lvm2-2.02.95-10.el6.src.rpm
Size : 21448 License: LGPLv2
Signature : RSA/SHA1, 2012年06月25日 07時17分04秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/lvm2
Summary : Device-mapper event daemon shared library
Description :
This package contains the device-mapper event daemon shared library,
libdevmapper-event.

Name : device-mapper-libs Relocations: (not relocatable)
Version : 1.02.74 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時28分29秒
Install Date: 2012年08月26日 10時33分27秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: lvm2-2.02.95-10.el6.src.rpm
Size : 226440 License: LGPLv2
Signature : RSA/SHA1, 2012年06月25日 07時20分15秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/lvm2
Summary : Device-mapper shared library
Description :
This package contains the device-mapper shared library, libdevmapper.

Name : device-mapper-multipath Relocations: (not relocatable)
Version : 0.4.9 Vendor: CentOS
Release : 56.el6_3.1 Build Date: 2012年07月24日 17時12分23秒
Install Date: 2012年08月26日 15時39分06秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: device-mapper-multipath-0.4.9-56.el6_3.1.src.rpm
Size : 177145 License: GPL+
Signature : RSA/SHA1, 2012年07月24日 19時55分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://christophe.varoqui.free.fr/
Summary : Tools to manage multipath devices using device-mapper
Description :
device-mapper-multipath provides tools to manage multipath devices by
instructing the device-mapper multipath kernel module what to do.
The tools are :
* multipath - Scan the system for multipath devices and assemble them.
* multipathd - Detects when paths fail and execs multipath to update things.

Name : device-mapper-multipath-libs Relocations: (not relocatable)
Version : 0.4.9 Vendor: CentOS
Release : 56.el6_3.1 Build Date: 2012年07月24日 17時12分23秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: device-mapper-multipath-0.4.9-56.el6_3.1.src.rpm
Size : 412837 License: GPL+
Signature : RSA/SHA1, 2012年07月24日 19時55分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://christophe.varoqui.free.fr/
Summary : The device-mapper-multipath modules and shared library
Description :
The device-mapper-multipath-libs provides the path checker
and prioritizer modules. It also contains the multipath shared library,
libmultipath.

Name : dhclient Relocations: (not relocatable)
Version : 4.1.1 Vendor: CentOS
Release : 31.0.1.P1.el6.centos.1 Build Date: 2012年08月15日 23時30分18秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: dhcp-4.1.1-31.0.1.P1.el6.centos.1.src.rpm
Size : 630784 License: ISC
Signature : RSA/SHA1, 2012年08月16日 06時11分09秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://isc.org/products/DHCP/
Summary : Provides the dhclient ISC DHCP client daemon and dhclient-script
Description :
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.

To use DHCP on your network, install a DHCP service (or relay agent),
and on clients run a DHCP client daemon. The dhclient package
provides the ISC DHCP client daemon.

Name : dhcp-common Relocations: (not relocatable)
Version : 4.1.1 Vendor: CentOS
Release : 31.0.1.P1.el6.centos.1 Build Date: 2012年08月15日 23時30分18秒
Install Date: 2012年08月26日 15時38分24秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: dhcp-4.1.1-31.0.1.P1.el6.centos.1.src.rpm
Size : 198000 License: ISC
Signature : RSA/SHA1, 2012年08月16日 06時11分09秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://isc.org/products/DHCP/
Summary : Common files used by ISC dhcp client and server
Description :
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.

This package provides common files used by dhcp and dhclient package.

Name : diffutils Relocations: (not relocatable)
Version : 2.8.1 Vendor: CentOS
Release : 28.el6 Build Date: 2010年11月11日 13時29分05秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b4.bsys.dev.centos.org
Group : Applications/Text Source RPM: diffutils-2.8.1-28.el6.src.rpm
Size : 588813 License: GPLv2+
Signature : RSA/8, 2011年07月03日 13時10分10秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/diffutils/diffutils.html
Summary : A GNU collection of diff utilities
Description :
Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
compares two files and shows the differences, line by line. The cmp
command shows the offset and line numbers where two files differ, or
cmp can show the characters that differ between the two files. The
diff3 command shows the differences between three files. Diff3 can be
used when two people have made independent changes to a common
original; diff3 can produce a merged file that contains both sets of
changes and warnings about conflicts. The sdiff command can be used
to merge two files interactively.

Install diffutils if you need to compare text files.

Name : dracut Relocations: (not relocatable)
Version : 004 Vendor: CentOS
Release : 284.el6_3 Build Date: 2012年07月16日 20時01分17秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: dracut-004-284.el6_3.src.rpm
Size : 242919 License: GPLv2+
Signature : RSA/SHA1, 2012年07月16日 21時35分48秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://apps.sourceforge.net/trac/dracut/wiki
Summary : Initramfs generator using udev
Description :
dracut is a new, event-driven initramfs infrastructure based around udev.

Name : dracut-kernel Relocations: (not relocatable)
Version : 004 Vendor: CentOS
Release : 284.el6_3 Build Date: 2012年07月16日 20時01分17秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: dracut-004-284.el6_3.src.rpm
Size : 202 License: GPLv2+
Signature : RSA/SHA1, 2012年07月16日 21時35分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://apps.sourceforge.net/trac/dracut/wiki
Summary : Metapackage to build generic initramfs with dracut with only kernel modules
Description :
This package requires everything which is needed to build a initramfs with all
kernel modules and firmware files needed by dracut modules.

Name : dracut-network Relocations: (not relocatable)
Version : 004 Vendor: CentOS
Release : 284.el6_3 Build Date: 2012年07月16日 20時01分17秒
Install Date: 2012年08月26日 15時39分06秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: dracut-004-284.el6_3.src.rpm
Size : 87435 License: GPLv2+
Signature : RSA/SHA1, 2012年07月16日 21時35分48秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://apps.sourceforge.net/trac/dracut/wiki
Summary : Dracut modules to build a dracut initramfs with network support
Description :
This package requires everything which is needed to build a generic
all purpose initramfs with network support with dracut.

Name : e2fsprogs Relocations: (not relocatable)
Version : 1.41.12 Vendor: CentOS
Release : 12.el6 Build Date: 2012年06月22日 17時55分28秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: e2fsprogs-1.41.12-12.el6.src.rpm
Size : 2016030 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時19分43秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://e2fsprogs.sourceforge.net/
Summary : Utilities for managing ext2, ext3, and ext4 filesystems
Description :
The e2fsprogs package contains a number of utilities for creating,
checking, modifying, and correcting any inconsistencies in second,
third and fourth extended (ext2/ext3/ext4) filesystems. E2fsprogs
contains e2fsck (used to repair filesystem inconsistencies after an
unclean shutdown), mke2fs (used to initialize a partition to contain
an empty ext2 filesystem), debugfs (used to examine the internal
structure of a filesystem, to manually repair a corrupted
filesystem, or to create test cases for e2fsck), tune2fs (used to
modify filesystem parameters), and most of the other core ext2fs
filesystem utilities.

You should install the e2fsprogs package if you need to manage the
performance of an ext2, ext3, or ext4 filesystem.

Name : e2fsprogs-libs Relocations: (not relocatable)
Version : 1.41.12 Vendor: CentOS
Release : 12.el6 Build Date: 2012年06月22日 17時55分28秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b8.bsys.dev.centos.org
Group : Development/Libraries Source RPM: e2fsprogs-1.41.12-12.el6.src.rpm
Size : 274473 License: GPLv2 and LGPLv2
Signature : RSA/SHA1, 2012年06月25日 07時18分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://e2fsprogs.sourceforge.net/
Summary : Ext2/3/4 filesystem-specific shared libraries
Description :
E2fsprogs-libs contains libe2p and libext2fs, the libraries of the
e2fsprogs package.

These libraries are used to directly acccess ext2/3/4 filesystems
from userspace.

Name : efibootmgr Relocations: (not relocatable)
Version : 0.5.4 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 15時29分08秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: efibootmgr-0.5.4-10.el6.src.rpm
Size : 72726 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時18分56秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://linux.dell.com/efibootmgr/
Summary : EFI Boot Manager
Description :
efibootmgr displays and allows the user to edit the Intel Extensible
Firmware Interface (EFI) Boot Manager variables. Additional
information about EFI can be found at
http://developer.intel.com/technology/efi/efi.htm and http://uefi.org/.

Name : elfutils-libelf Relocations: (not relocatable)
Version : 0.152 Vendor: CentOS
Release : 1.el6 Build Date: 2011年07月20日 00時14分19秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b6.bsys.dev.centos.org
Group : Development/Tools Source RPM: elfutils-0.152-1.el6.src.rpm
Size : 920293 License: GPLv2 with exceptions
Signature : RSA/SHA1, 2011年09月26日 13時18分01秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/elfutils/
Summary : Library to read and write ELF files
Description :
The elfutils-libelf package provides a DSO which allows reading and
writing ELF files on a high level. Third party programs depend on
this package to read internals of ELF files. The programs of the
elfutils package use it also to generate new ELF files.

Name : ethtool Relocations: (not relocatable)
Version : 2.6.33 Vendor: CentOS
Release : 0.3.el6 Build Date: 2010年11月11日 15時48分40秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b3.bsys.dev.centos.org
Group : Applications/System Source RPM: ethtool-2.6.33-0.3.el6.src.rpm
Size : 203259 License: GPLv2
Signature : RSA/8, 2011年07月03日 13時13分22秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/gkernel/
Summary : Ethernet settings tool for PCI ethernet cards
Description :
This utility allows querying and changing settings such as speed,
port, autonegotiation, PCI locations and checksum offload on many
network devices, especially of ethernet devices.

Name : expat Relocations: (not relocatable)
Version : 2.0.1 Vendor: CentOS
Release : 11.el6_2 Build Date: 2012年06月14日 00時01分42秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: expat-2.0.1-11.el6_2.src.rpm
Size : 198018 License: MIT
Signature : RSA/SHA1, 2012年06月14日 02時00分07秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.libexpat.org/
Summary : An XML parser library
Description :
This is expat, the C library for parsing XML, written by James Clark. Expat
is a stream oriented XML parser. This means that you register handlers with
the parser prior to starting the parse. These handlers are called when the
parser discovers the associated structures in the document being parsed. A
start tag is an example of the kind of structures for which you may
register handlers.

Name : fcoe-utils Relocations: (not relocatable)
Version : 1.0.22 Vendor: CentOS
Release : 3.el6 Build Date: 2012年06月22日 19時34分19秒
Install Date: 2012年08月26日 10時33分35秒 Build Host: c6b10.bsys.dev.centos.org
Group : Applications/System Source RPM: fcoe-utils-1.0.22-3.el6.src.rpm
Size : 221463 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時20分16秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.open-fcoe.org
Summary : Fibre Channel over Ethernet utilities
Description :
Fibre Channel over Ethernet utilities
fcoeadm - command line tool for configuring FCoE interfaces
fcoemon - service to configure DCB Ethernet QOS filters, works with dcbd or
lldpad

Name : file Relocations: (not relocatable)
Version : 5.04 Vendor: CentOS
Release : 13.el6 Build Date: 2012年03月15日 18時37分38秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/File Source RPM: file-5.04-13.el6.src.rpm
Size : 56567 License: BSD
Signature : RSA/SHA1, 2012年03月15日 18時50分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.darwinsys.com/file/
Summary : A utility for determining file types
Description :
The file command is used to identify a particular file according to the
type of data contained by the file. File can identify many different
file types, including ELF binaries, system libraries, RPM packages, and
different graphics formats.

Name : file-libs Relocations: (not relocatable)
Version : 5.04 Vendor: CentOS
Release : 13.el6 Build Date: 2012年03月15日 18時37分38秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/File Source RPM: file-5.04-13.el6.src.rpm
Size : 2508109 License: BSD
Signature : RSA/SHA1, 2012年03月15日 18時50分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.darwinsys.com/file/
Summary : Libraries for applications using libmagic
Description :

Libraries for applications using libmagic.

Name : filesystem Relocations: (not relocatable)
Version : 2.4.30 Vendor: CentOS
Release : 3.el6 Build Date: 2011年09月23日 20時51分34秒
Install Date: 2012年08月26日 10時33分05秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Base Source RPM: filesystem-2.4.30-3.el6.src.rpm
Size : 0 License: Public Domain
Signature : RSA/SHA1, 2011年09月26日 13時18分23秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/filesystem
Summary : The basic directory layout for a Linux system
Description :
The filesystem package is one of the basic packages that is installed
on a Linux system. Filesystem contains the basic directory layout
for a Linux operating system, including the correct permissions for
the directories.

Name : findutils Relocations: (not relocatable)
Version : 4.4.2 Vendor: CentOS
Release : 6.el6 Build Date: 2010年11月11日 16時50分57秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b1.bsys.dev.centos.org
Group : Applications/File Source RPM: findutils-4.4.2-6.el6.src.rpm
Size : 1446945 License: GPLv3+
Signature : RSA/8, 2011年07月03日 13時14分37秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/findutils/
Summary : The GNU versions of find utilities (find and xargs)
Description :
The findutils package contains programs which will help you locate
files on your system. The find utility searches through a hierarchy
of directories looking for files which match a certain set of criteria
(such as a filename pattern). The xargs utility builds and executes
command lines from standard input arguments (usually lists of file
names generated by the find command).

You should install findutils because it includes tools that are very
useful for finding things on your system.

Name : fipscheck Relocations: (not relocatable)
Version : 1.2.0 Vendor: CentOS
Release : 7.el6 Build Date: 2011年12月08日 04時13分53秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: fipscheck-1.2.0-7.el6.src.rpm
Size : 28163 License: BSD
Signature : RSA/SHA1, 2011年12月09日 04時58分48秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://fedorahosted.org/fipscheck/
Summary : A library for integrity verification of FIPS validated modules
Description :
FIPSCheck is a library for integrity verification of FIPS validated
modules. The package also provides helper binaries for creation and
verification of the HMAC-SHA256 checksum files.

Name : fipscheck-lib Relocations: (not relocatable)
Version : 1.2.0 Vendor: CentOS
Release : 7.el6 Build Date: 2011年12月08日 04時13分53秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: fipscheck-1.2.0-7.el6.src.rpm
Size : 10353 License: BSD
Signature : RSA/SHA1, 2011年12月09日 04時58分46秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://fedorahosted.org/fipscheck/
Summary : Library files for fipscheck
Description :
This package contains the FIPSCheck library.

Name : gamin Relocations: (not relocatable)
Version : 0.1.10 Vendor: CentOS
Release : 9.el6 Build Date: 2010年11月11日 17時03分58秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: gamin-0.1.10-9.el6.src.rpm
Size : 416440 License: LGPLv2
Signature : RSA/8, 2011年07月03日 13時15分37秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnome.org/~veillard/gamin/
Summary : Library providing the FAM File Alteration Monitor API
Description :
This C library provides an API and ABI compatible file alteration
monitor mechanism compatible with FAM but not dependent on a system wide
daemon.

Name : gawk Relocations: (not relocatable)
Version : 3.1.7 Vendor: CentOS
Release : 9.el6 Build Date: 2012年03月14日 00時58分00秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/Text Source RPM: gawk-3.1.7-9.el6.src.rpm
Size : 2036440 License: GPLv3+
Signature : RSA/SHA1, 2012年03月14日 08時00分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/gawk/gawk.html
Summary : The GNU version of the awk text processing utility
Description :
The gawk package contains the GNU version of awk, a text processing
utility. Awk interprets a special-purpose programming language to do
quick and easy text pattern matching and reformatting jobs.

Install the gawk package if you need a text processing utility. Gawk is
considered to be a standard Linux tool for processing text.

Name : gdbm Relocations: (not relocatable)
Version : 1.8.0 Vendor: CentOS
Release : 36.el6 Build Date: 2010年11月11日 17時21分31秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: gdbm-1.8.0-36.el6.src.rpm
Size : 48586 License: GPLv2+
Signature : RSA/8, 2011年07月03日 13時16分05秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/gdbm/
Summary : A GNU set of database routines which use extensible hashing
Description :
Gdbm is a GNU database indexing library, including routines which use
extensible hashing. Gdbm works in a similar way to standard UNIX dbm
routines. Gdbm is useful for developers who write C applications and
need access to a simple and efficient database or who are building C
applications which will use such a database.

If you're a C developer and your programs need access to simple
database routines, you should install gdbm. You'll also need to
install gdbm-devel.

Name : glib2 Relocations: (not relocatable)
Version : 2.22.5 Vendor: CentOS
Release : 7.el6 Build Date: 2012年06月22日 15時17分20秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: glib2-2.22.5-7.el6.src.rpm
Size : 5190068 License: LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時16分52秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gtk.org
Summary : A library of handy utility functions
Description :
GLib is the low-level core library that forms the basis
for projects such as GTK+ and GNOME. It provides data structure
handling for C, portability wrappers, and interfaces for such runtime
functionality as an event loop, threads, dynamic loading, and an
object system.

This package provides version 2 of GLib.

Name : glibc Relocations: (not relocatable)
Version : 2.12 Vendor: CentOS
Release : 1.80.el6_3.4 Build Date: 2012年08月13日 23時05分36秒
Install Date: 2012年08月26日 15時38分27秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: glibc-2.12-1.80.el6_3.4.src.rpm
Size : 12932782 License: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+
Signature : RSA/SHA1, 2012年08月14日 00時26分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/glibc/
Summary : The GNU libc libraries
Description :
The glibc package contains standard libraries which are used by
multiple programs on the system. In order to save disk space and
memory, as well as to make upgrading easier, common system code is
kept in one place and shared between programs. This particular package
contains the most important sets of shared libraries: the standard C
library and the standard math library. Without these two libraries, a
Linux system will not function.

Name : glibc-common Relocations: (not relocatable)
Version : 2.12 Vendor: CentOS
Release : 1.80.el6_3.4 Build Date: 2012年08月13日 23時05分36秒
Install Date: 2012年08月26日 15時38分34秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: glibc-2.12-1.80.el6_3.4.src.rpm
Size : 112395114 License: LGPLv2+ and LGPLv2+ with exceptions and GPLv2+
Signature : RSA/SHA1, 2012年08月14日 00時27分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/glibc/
Summary : Common binaries and locale data for glibc
Description :
The glibc-common package includes common binaries for the GNU libc
libraries, as well as national language (locale) support.

Name : gmp Relocations: (not relocatable)
Version : 4.3.1 Vendor: CentOS
Release : 7.el6_2.2 Build Date: 2012年03月08日 04時48分51秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: gmp-4.3.1-7.el6_2.2.src.rpm
Size : 657883 License: LGPLv2+ and GPLv3+ and LGPLv3+
Signature : RSA/SHA1, 2012年03月08日 05時12分46秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://gmplib.org/
Summary : A GNU arbitrary precision library
Description :
The gmp package contains GNU MP, a library for arbitrary precision
arithmetic, signed integers operations, rational numbers and floating
point numbers. GNU MP is designed for speed, for both small and very
large operands. GNU MP is fast because it uses fullwords as the basic
arithmetic type, it uses fast algorithms, it carefully optimizes
assembly code for many CPUs' most common inner loops, and it generally
emphasizes speed over simplicity/elegance in its operations.

Install the gmp package if you need a fast arbitrary precision
library.

Name : gnupg2 Relocations: (not relocatable)
Version : 2.0.14 Vendor: CentOS
Release : 4.el6 Build Date: 2010年11月11日 21時50分42秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/System Source RPM: gnupg2-2.0.14-4.el6.src.rpm
Size : 6088924 License: GPLv3+
Signature : RSA/8, 2011年07月03日 13時19分05秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnupg.org/
Summary : Utility for secure communication and data storage
Description :
GnuPG is GNU's tool for secure communication and data storage. It can
be used to encrypt data and to create digital signatures. It includes
an advanced key management facility and is compliant with the proposed
OpenPGP Internet standard as described in RFC2440 and the S/MIME
standard as described by several RFCs.

GnuPG 2.0 is a newer version of GnuPG with additional support for
S/MIME. It has a different design philosophy that splits
functionality up into several modules. The S/MIME and smartcard functionality
is provided by the gnupg2-smime package.

Name : gpg-pubkey Relocations: (not relocatable)
Version : c105b9de Vendor: (none)
Release : 4e0fd3a3 Build Date: 2012年08月26日 10時52分31秒
Install Date: 2012年08月26日 10時52分31秒 Build Host: localhost
Group : Public Keys Source RPM: (none)
Size : 0 License: pubkey
Signature : (none)
Summary : gpg(CentOS-6 Key (CentOS 6 Official Signing Key) )
Description :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.8.0 (NSS-3)
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=jrWY
-----END PGP PUBLIC KEY BLOCK-----

Name : gpgme Relocations: (not relocatable)
Version : 1.1.8 Vendor: CentOS
Release : 3.el6 Build Date: 2010年11月11日 21時58分38秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/System Source RPM: gpgme-1.1.8-3.el6.src.rpm
Size : 729658 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 13時19分20秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnupg.org/related_software/gpgme/
Summary : GnuPG Made Easy - high level crypto API
Description :
GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG
easier for applications. It provides a high-level crypto API for
encryption, decryption, signing, signature verification and key
management.

Name : grep Relocations: (not relocatable)
Version : 2.6.3 Vendor: CentOS
Release : 3.el6 Build Date: 2012年03月08日 11時00分15秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/Text Source RPM: grep-2.6.3-3.el6.src.rpm
Size : 802765 License: GPLv3+
Signature : RSA/SHA1, 2012年03月08日 14時16分07秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/grep/
Summary : Pattern matching utilities
Description :
The GNU versions of commonly used grep utilities. Grep searches through
textual input for lines which contain a match to a specified pattern and then
prints the matching lines. GNU's grep utilities include grep, egrep and fgrep.

GNU grep is needed by many scripts, so it shall be installed on every system.

Name : groff Relocations: (not relocatable)
Version : 1.18.1.4 Vendor: CentOS
Release : 21.el6 Build Date: 2010年11月12日 07時23分53秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/Publishing Source RPM: groff-1.18.1.4-21.el6.src.rpm
Size : 5318766 License: GPLv2 and GFDL
Signature : RSA/8, 2011年07月03日 13時19分43秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://groff.ffii.org
Summary : A document formatting system
Description :
Groff is a document formatting system. Groff takes standard text and
formatting commands as input and produces formatted output. The
created documents can be shown on a display or printed on a printer.
Groff's formatting commands allow you to specify font type and size,
bold type, italic type, the number and size of columns on a page, and
more.

Groff can also be used to format man pages. If you are going to use
groff with the X Window System, you will also need to install the
groff-gxditview package.

Name : grub Relocations: (not relocatable)
Version : 0.97 Vendor: CentOS
Release : 77.el6 Build Date: 2012年06月22日 16時43分49秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: grub-0.97-77.el6.src.rpm
Size : 2461573 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時18分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/grub/
Summary : Grand Unified Boot Loader.
Description :
GRUB (Grand Unified Boot Loader) is an experimental boot loader
capable of booting into most free operating systems - Linux, FreeBSD,
NetBSD, GNU Mach, and others as well as most commercial operating
systems.

Name : grubby Relocations: (not relocatable)
Version : 7.0.15 Vendor: CentOS
Release : 3.el6 Build Date: 2012年06月22日 16時39分04秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: grubby-7.0.15-3.el6.src.rpm
Size : 84472 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時18分46秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://git.fedorahosted.org/git/grubby.git
Summary : Command line tool for updating bootloader configs
Description :
grubby is a command line tool for updating and displaying information about
the configuration files for the grub, lilo, elilo (ia64), yaboot (powerpc)
and zipl (s390) boot loaders. It is primarily designed to be used from scripts
which install new kernels and need to find information about the current boot
environment.

Name : gzip Relocations: (not relocatable)
Version : 1.3.12 Vendor: CentOS
Release : 18.el6 Build Date: 2010年11月12日 07時25分09秒
Install Date: 2012年08月26日 10時33分20秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/File Source RPM: gzip-1.3.12-18.el6.src.rpm
Size : 225845 License: GPLv2+ and GFDL
Signature : RSA/8, 2011年07月03日 13時21分28秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gzip.org/
Summary : The GNU data compression program
Description :
The gzip package contains the popular GNU gzip data compression
program. Gzipped files have a .gz extension.

Gzip should be installed on your system, because it is a
very commonly used data compression program.

Name : hwdata Relocations: (not relocatable)
Version : 0.233 Vendor: CentOS
Release : 7.8.el6 Build Date: 2012年06月23日 00時17分16秒
Install Date: 2012年08月26日 10時33分21秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: hwdata-0.233-7.8.el6.src.rpm
Size : 4290437 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時20分10秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://git.fedorahosted.org/git/hwdata.git
Summary : Hardware identification and configuration data
Description :
hwdata contains various hardware identification and configuration data,
such as the pci.ids database and MonitorsDb databases.

Name : info Relocations: (not relocatable)
Version : 4.13a Vendor: CentOS
Release : 8.el6 Build Date: 2010年08月20日 14時30分28秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Base Source RPM: texinfo-4.13a-8.el6.src.rpm
Size : 329482 License: GPLv3+
Signature : RSA/8, 2011年07月03日 13時24分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/texinfo/
Summary : A stand-alone TTY-based reader for GNU texinfo documentation
Description :
The GNU project uses the texinfo file format for much of its
documentation. The info package provides a standalone TTY-based
browser program for viewing texinfo files.

Name : initscripts Relocations: (not relocatable)
Version : 9.03.31 Vendor: CentOS
Release : 2.el6.centos Build Date: 2012年06月23日 04時52分27秒
Install Date: 2012年08月26日 10時33分27秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Base Source RPM: initscripts-9.03.31-2.el6.centos.src.rpm
Size : 5711416 License: GPLv2 and GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時19分13秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://fedorahosted.org/releases/i/n/initscripts/
Summary : The inittab file and the /etc/init.d scripts
Description :
The initscripts package contains the basic system scripts used to boot
your Red Hat or Fedora system, change runlevels, and shut the system down
cleanly. Initscripts also contains the scripts that activate and
deactivate most network interfaces.

Name : iproute Relocations: (not relocatable)
Version : 2.6.32 Vendor: CentOS
Release : 20.el6 Build Date: 2012年06月22日 20時51分20秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b8.bsys.dev.centos.org
Group : Applications/System Source RPM: iproute-2.6.32-20.el6.src.rpm
Size : 867747 License: GPLv2+ and Public Domain
Signature : RSA/SHA1, 2012年06月25日 07時16分56秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://linux-net.osdl.org/index.php/Iproute2
Summary : Advanced IP routing and network device configuration tools
Description :
The iproute package contains networking utilities (ip and rtmon, for
example) which are designed to use the advanced networking
capabilities of the Linux 2.4.x and 2.6.x kernel.

Name : iptables Relocations: (not relocatable)
Version : 1.4.7 Vendor: CentOS
Release : 5.1.el6_2 Build Date: 2012年02月25日 14時26分45秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Base Source RPM: iptables-1.4.7-5.1.el6_2.src.rpm
Size : 852603 License: GPLv2
Signature : RSA/SHA1, 2012年02月25日 19時24分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.netfilter.org/
Summary : Tools for managing Linux kernel packet filtering capabilities
Description :
The iptables utility controls the network packet filtering code in the
Linux kernel. If you need to set up firewalls and/or IP masquerading,
you should install this package.

Name : iptables-ipv6 Relocations: (not relocatable)
Version : 1.4.7 Vendor: CentOS
Release : 5.1.el6_2 Build Date: 2012年02月25日 14時26分45秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Base Source RPM: iptables-1.4.7-5.1.el6_2.src.rpm
Size : 187742 License: GPLv2
Signature : RSA/SHA1, 2012年02月25日 19時24分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.netfilter.org/
Summary : IPv6 support for iptables
Description :
The iptables package contains IPv6 (the next version of the IP
protocol) support for iptables. Iptables controls the Linux kernel
network packet filtering code, allowing you to set up firewalls and IP
masquerading.

Install iptables-ipv6 if you need to set up firewalling for your
network and you are using ipv6.

Name : iputils Relocations: (not relocatable)
Version : 20071127 Vendor: CentOS
Release : 16.el6 Build Date: 2011年07月19日 15時57分17秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: iputils-20071127-16.el6.src.rpm
Size : 299349 License: BSD with advertising and GPLv2+ and Rdisc
Signature : RSA/SHA1, 2011年09月26日 13時19分31秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.skbuff.net/iputils
Summary : Network monitoring tools including ping
Description :
The iputils package contains basic utilities for monitoring a network,
including ping. The ping command sends a series of ICMP protocol
ECHO_REQUEST packets to a specified network host to discover whether
the target machine is alive and receiving network traffic.

Name : iscsi-initiator-utils Relocations: (not relocatable)
Version : 6.2.0.872 Vendor: CentOS
Release : 41.el6 Build Date: 2012年06月22日 19時56分48秒
Install Date: 2012年08月26日 10時33分29秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: iscsi-initiator-utils-6.2.0.872-41.el6.src.rpm
Size : 2312734 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時19分37秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.open-iscsi.org
Summary : iSCSI daemon and utility programs
Description :
The iscsi package provides the server daemon for the iSCSI protocol,
as well as the utility programs used to manage it. iSCSI is a protocol
for distributed disk access using SCSI commands sent over Internet
Protocol networks.

Name : kbd Relocations: (not relocatable)
Version : 1.15 Vendor: CentOS
Release : 11.el6 Build Date: 2010年11月12日 05時45分43秒
Install Date: 2012年08月26日 10時33分30秒 Build Host: c5b2.bsys.dev.centos.org
Group : System Environment/Base Source RPM: kbd-1.15-11.el6.src.rpm
Size : 991792 License: GPLv2+
Signature : RSA/8, 2011年07月03日 13時27分01秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://ftp.altlinux.org/pub/people/legion/kbd
Summary : Tools for configuring the console (keyboard, virtual terminals, etc.)
Description :
The kbd package contains tools for managing a Linux
system's console's behavior, including the keyboard, the screen
fonts, the virtual terminals and font files.

Name : kbd-misc Relocations: (not relocatable)
Version : 1.15 Vendor: CentOS
Release : 11.el6 Build Date: 2010年11月12日 05時43分02秒
Install Date: 2012年08月26日 10時33分29秒 Build Host: c5b2.bsys.dev.centos.org
Group : System Environment/Base Source RPM: kbd-1.15-11.el6.src.rpm
Size : 1443451 License: GPLv2+
Signature : RSA/8, 2011年07月03日 13時18分04秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://ftp.altlinux.org/pub/people/legion/kbd
Summary : Data for kbd package
Description :
The kbd-misc package contains data for kbd package - console fonts,
keymaps etc. Please note that kbd-misc is not helpful without kbd.

Name : kernel Relocations: (not relocatable)
Version : 2.6.32 Vendor: CentOS
Release : 279.5.2.el6 Build Date: 2012年08月24日 11時16分32秒
Install Date: 2012年08月26日 15時38分44秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: kernel-2.6.32-279.5.2.el6.src.rpm
Size : 119759169 License: GPLv2
Signature : RSA/SHA1, 2012年08月24日 13時21分15秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.kernel.org/
Summary : The Linux kernel
Description :
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.

Name : kernel Relocations: (not relocatable)
Version : 2.6.32 Vendor: CentOS
Release : 279.el6 Build Date: 2012年06月22日 22時31分57秒
Install Date: 2012年08月26日 10時33分34秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: kernel-2.6.32-279.el6.src.rpm
Size : 119491509 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時19分16秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.kernel.org/
Summary : The Linux kernel
Description :
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.

Name : kernel-firmware Relocations: (not relocatable)
Version : 2.6.32 Vendor: CentOS
Release : 279.5.2.el6 Build Date: 2012年08月24日 05時39分18秒
Install Date: 2012年08月26日 15時38分39秒 Build Host: c6b10.bsys.dev.centos.org
Group : Development/System Source RPM: kernel-2.6.32-279.5.2.el6.src.rpm
Size : 16331750 License: GPL+ and GPLv2+ and MIT and Redistributable, no modification permitted
Signature : RSA/SHA1, 2012年08月24日 13時21分14秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.kernel.org/
Summary : Firmware files used by the Linux kernel
Description :
Kernel-firmware includes firmware files required for some devices to
operate.

Name : keyutils Relocations: (not relocatable)
Version : 1.4 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 15時20分38秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: keyutils-1.4-4.el6.src.rpm
Size : 70677 License: GPLv2+ and LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時19分57秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://people.redhat.com/~dhowells/keyutils/
Summary : Linux Key Management Utilities
Description :
Utilities to control the kernel key management facility and to provide
a mechanism by which the kernel call back to user space to get a key
instantiated.

Name : keyutils-libs Relocations: (not relocatable)
Version : 1.4 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 15時20分38秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: keyutils-1.4-4.el6.src.rpm
Size : 36624 License: GPLv2+ and LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時18分51秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://people.redhat.com/~dhowells/keyutils/
Summary : Key utilities library
Description :
This package provides a wrapper library for the key management facility system
calls.

Name : kpartx Relocations: (not relocatable)
Version : 0.4.9 Vendor: CentOS
Release : 56.el6_3.1 Build Date: 2012年07月24日 17時12分23秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: device-mapper-multipath-0.4.9-56.el6_3.1.src.rpm
Size : 33158 License: GPL+
Signature : RSA/SHA1, 2012年07月24日 19時55分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://christophe.varoqui.free.fr/
Summary : Partition device manager for device-mapper devices
Description :
kpartx manages partition creation and removal for device-mapper devices.

Name : krb5-libs Relocations: (not relocatable)
Version : 1.9 Vendor: CentOS
Release : 33.el6_3.2 Build Date: 2012年08月01日 04時02分32秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: krb5-1.9-33.el6_3.2.src.rpm
Size : 2007144 License: MIT
Signature : RSA/SHA1, 2012年08月01日 07時54分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://web.mit.edu/kerberos/www/
Summary : The shared libraries used by Kerberos 5
Description :
Kerberos is a network authentication system. The krb5-libs package
contains the shared libraries needed by Kerberos 5. If you are using
Kerberos, you need to install this package.

Name : less Relocations: (not relocatable)
Version : 436 Vendor: CentOS
Release : 10.el6 Build Date: 2011年12月08日 06時21分45秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : Applications/Text Source RPM: less-436-10.el6.src.rpm
Size : 200427 License: GPLv3+
Signature : RSA/SHA1, 2011年12月09日 05時15分08秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.greenwoodsoftware.com/less/
Summary : A text file browser similar to more, but better
Description :
The less utility is a text file browser that resembles more, but has
more capabilities. Less allows you to move backwards in the file as
well as forwards. Since less doesn't have to read the entire input file
before it starts, less starts up more quickly than text editors (for
example, vi).

You should install less because it is a basic utility for viewing text
files, and you'll use it frequently.

Name : libacl Relocations: (not relocatable)
Version : 2.2.49 Vendor: CentOS
Release : 6.el6 Build Date: 2011年12月08日 01時53分55秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: acl-2.2.49-6.el6.src.rpm
Size : 31280 License: LGPLv2+
Signature : RSA/SHA1, 2011年12月09日 04時42分15秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://acl.bestbits.at/
Summary : Dynamic library for access control list support
Description :
This package contains the libacl.so dynamic library which contains
the POSIX 1003.1e draft standard 17 functions for manipulating access
control lists.

Name : libaio Relocations: (not relocatable)
Version : 0.3.107 Vendor: CentOS
Release : 10.el6 Build Date: 2010年08月23日 06時08分18秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libaio-0.3.107-10.el6.src.rpm
Size : 34542 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 13時31分33秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://git.kernel.org/?p=libs/libaio/libaio.git
Summary : Linux-native asynchronous I/O access library
Description :
The Linux-native asynchronous I/O facility ("async I/O", or "aio") has a
richer API and capability set than the simple POSIX async I/O facility.
This library, libaio, provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library in order to provide
kernel-accelerated async I/O capabilities, as do applications which
require the Linux-native async I/O API.

Name : libattr Relocations: (not relocatable)
Version : 2.4.44 Vendor: CentOS
Release : 7.el6 Build Date: 2011年09月24日 03時54分00秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: attr-2.4.44-7.el6.src.rpm
Size : 18712 License: LGPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時20分08秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://acl.bestbits.at/
Summary : Dynamic library for extended attribute support
Description :
This package contains the libattr.so dynamic library which contains
the extended attribute system calls and library functions.

Name : libblkid Relocations: (not relocatable)
Version : 2.17.2 Vendor: CentOS
Release : 12.7.el6 Build Date: 2012年06月22日 19時51分03秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b10.bsys.dev.centos.org
Group : Development/Libraries Source RPM: util-linux-ng-2.17.2-12.7.el6.src.rpm
Size : 136104 License: LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時20分10秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng
Summary : Block device ID library
Description :
This is block device identification library, part of util-linux-ng.

Name : libcap Relocations: (not relocatable)
Version : 2.16 Vendor: CentOS
Release : 5.5.el6 Build Date: 2011年12月08日 05時04分01秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b18n2.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libcap-2.16-5.5.el6.src.rpm
Size : 64437 License: LGPLv2+ or BSD
Signature : RSA/SHA1, 2011年12月09日 05時15分52秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://ftp.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
Summary : Library for getting and setting POSIX.1e capabilities
Description :
libcap is a library for getting and setting POSIX.1e (formerly POSIX 6)
draft 15 capabilities.

Name : libcap-ng Relocations: (not relocatable)
Version : 0.6.4 Vendor: CentOS
Release : 3.el6_0.1 Build Date: 2011年06月25日 12時49分32秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libcap-ng-0.6.4-3.el6_0.1.src.rpm
Size : 45214 License: LGPLv2+
Signature : RSA/8, 2011年07月06日 10時40分43秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://people.redhat.com/sgrubb/libcap-ng
Summary : An alternate posix capabilities library
Description :
Libcap-ng is a library that makes using posix capabilities easier

Name : libcgroup Relocations: (not relocatable)
Version : 0.37 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 16時22分42秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b10.bsys.dev.centos.org
Group : Development/Libraries Source RPM: libcgroup-0.37-4.el6.src.rpm
Size : 262765 License: LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時20分03秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://libcg.sourceforge.net/
Summary : Tools and libraries to control and monitor control groups
Description :
Control groups infrastructure. The tools and library help manipulate, control,
administrate and monitor control groups and the associated controllers.

Name : libcom_err Relocations: (not relocatable)
Version : 1.41.12 Vendor: CentOS
Release : 12.el6 Build Date: 2012年06月22日 17時55分28秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b8.bsys.dev.centos.org
Group : Development/Libraries Source RPM: e2fsprogs-1.41.12-12.el6.src.rpm
Size : 59233 License: MIT
Signature : RSA/SHA1, 2012年06月25日 07時16分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://e2fsprogs.sourceforge.net/
Summary : Common error description library
Description :
This is the common error description library, part of e2fsprogs.

libcom_err is an attempt to present a common error-handling mechanism.

Name : libconfig Relocations: (not relocatable)
Version : 1.3.2 Vendor: CentOS
Release : 1.1.el6 Build Date: 2010年08月19日 17時47分11秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libconfig-1.3.2-1.1.el6.src.rpm
Size : 170181 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 13時32分43秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.hyperrealm.com/libconfig/
Summary : C/C++ configuration file library
Description :
Libconfig is a simple library for manipulating structured configuration
files. This file format is more compact and more readable than XML. And
unlike XML, it is type-aware, so it is not necessary to do string parsing
in application code.

Name : libcurl Relocations: (not relocatable)
Version : 7.19.7 Vendor: CentOS
Release : 26.el6_2.4 Build Date: 2012年03月28日 20時22分41秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: curl-7.19.7-26.el6_2.4.src.rpm
Size : 340200 License: MIT
Signature : RSA/SHA1, 2012年03月28日 21時52分50秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://curl.haxx.se/
Summary : A library for getting files from web servers
Description :
This package provides a way for applications to use FTP, HTTP, Gopher and
other servers for getting files.

Name : libdrm Relocations: (not relocatable)
Version : 2.4.25 Vendor: CentOS
Release : 2.el6 Build Date: 2011年12月08日 08時38分33秒
Install Date: 2012年08月26日 10時33分30秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libdrm-2.4.25-2.el6.src.rpm
Size : 133976 License: MIT
Signature : RSA/SHA1, 2011年12月09日 05時17分06秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://dri.sourceforge.net
Summary : Direct Rendering Manager runtime library
Description :
Direct Rendering Manager runtime library

Name : libedit Relocations: (not relocatable)
Version : 2.11 Vendor: CentOS
Release : 4.20080712cvs.1.el6 Build Date: 2010年08月19日 17時42分00秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libedit-2.11-4.20080712cvs.1.el6.src.rpm
Size : 185648 License: BSD
Signature : RSA/8, 2011年07月03日 13時33分24秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.thrysoee.dk/editline/
Summary : The NetBSD Editline library
Description :
Libedit is an autotool- and libtoolized port of the NetBSD Editline library.
It provides generic line editing, history, and tokenization functions, similar
to those found in GNU Readline.

Name : libevent Relocations: (not relocatable)
Version : 1.4.13 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 20時58分49秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libevent-1.4.13-4.el6.src.rpm
Size : 232536 License: BSD
Signature : RSA/SHA1, 2012年06月25日 07時18分20秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://monkey.org/~provos/libevent/
Summary : Abstract asynchronous event notification library
Description :
The libevent API provides a mechanism to execute a callback function
when a specific event occurs on a file descriptor or after a timeout
has been reached. libevent is meant to replace the asynchronous event
loop found in event driven network servers. An application just needs
to call event_dispatch() and can then add or remove events dynamically
without having to change the event loop.

Name : libffi Relocations: (not relocatable)
Version : 3.0.5 Vendor: CentOS
Release : 3.2.el6 Build Date: 2010年11月12日 05時25分12秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libffi-3.0.5-3.2.el6.src.rpm
Size : 42881 License: BSD
Signature : RSA/8, 2011年07月03日 13時33分39秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceware.org/libffi
Summary : A portable foreign function interface library
Description :
Compilers for high level languages generate code that follow certain
conventions. These conventions are necessary, in part, for separate
compilation to work. One such convention is the "calling convention".
The calling convention is a set of assumptions made by the compiler
about where function arguments will be found on entry to a function. A
calling convention also specifies where the return value for a function
is found.

Some programs may not know at the time of compilation what arguments
are to be passed to a function. For instance, an interpreter may be
told at run-time about the number and types of arguments used to call a
given function. `Libffi' can be used in such programs to provide a
bridge from the interpreter program to compiled code.

The `libffi' library provides a portable, high level programming
interface to various calling conventions. This allows a programmer to
call any function specified by a call interface description at run time.

FFI stands for Foreign Function Interface. A foreign function
interface is the popular name for the interface that allows code
written in one language to call code written in another language. The
`libffi' library really only provides the lowest, machine dependent
layer of a fully featured foreign function interface. A layer must
exist above `libffi' that handles type conversions for values passed
between the two languages.

Name : libgcc Relocations: (not relocatable)
Version : 4.4.6 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 18時45分26秒
Install Date: 2012年08月26日 10時33分04秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: gcc-4.4.6-4.el6.src.rpm
Size : 117224 License: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions
Signature : RSA/SHA1, 2012年06月25日 07時18分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://gcc.gnu.org
Summary : GCC version 4.4 shared support library
Description :
This package contains GCC shared support library which is needed
e.g. for exception handling support.

Name : libgcrypt Relocations: (not relocatable)
Version : 1.4.5 Vendor: CentOS
Release : 9.el6_2.2 Build Date: 2012年04月16日 22時21分58秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libgcrypt-1.4.5-9.el6_2.2.src.rpm
Size : 536622 License: LGPLv2+
Signature : RSA/SHA1, 2012年04月16日 22時42分27秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnupg.org/
Summary : A general-purpose cryptography library
Description :
Libgcrypt is a general purpose crypto library based on the code used
in GNU Privacy Guard. This is a development version.

Name : libgpg-error Relocations: (not relocatable)
Version : 1.7 Vendor: CentOS
Release : 4.el6 Build Date: 2011年12月08日 02時37分21秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libgpg-error-1.7-4.el6.src.rpm
Size : 214321 License: LGPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時17分43秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.gnupg.org/gcrypt/libgpg-error/
Summary : Library for error values used by GnuPG components
Description :
This is a library that defines common error values for all GnuPG
components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon and possibly more in the future.

Name : libgssglue Relocations: (not relocatable)
Version : 0.1 Vendor: CentOS
Release : 11.el6 Build Date: 2011年07月19日 17時22分03秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libgssglue-0.1-11.el6.src.rpm
Size : 41157 License: GPL+
Signature : RSA/SHA1, 2011年09月26日 13時20分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.citi.umich.edu/projects/nfsv4/linux/
Summary : Generic Security Services Application Programming Interface Library
Description :
This library exports a gssapi interface, but doesn't implement any gssapi
mechanisms itself; instead it calls gssapi routines in other libraries,
depending on the mechanism.

Name : libhbaapi Relocations: (not relocatable)
Version : 2.2 Vendor: CentOS
Release : 14.el6 Build Date: 2012年06月22日 19時12分23秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libhbaapi-2.2-14.el6.src.rpm
Size : 49758 License: SNIA
Signature : RSA/SHA1, 2012年06月25日 07時18分28秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/hbaapi/
Summary : SNIA HBAAPI library
Description :
The SNIA HBA API library. C-level project to manage
Fibre Channel Host Bus Adapters.

Name : libhbalinux Relocations: (not relocatable)
Version : 1.0.13 Vendor: CentOS
Release : 1.el6 Build Date: 2012年06月22日 16時00分51秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libhbalinux-1.0.13-1.el6.src.rpm
Size : 70530 License: LGPLv2
Signature : RSA/SHA1, 2012年06月25日 07時16分27秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.open-fcoe.org
Summary : FC-HBAAPI implementation using scsi_transport_fc interfaces
Description :
SNIA HBAAPI vendor library built on top of the scsi_transport_fc interfaces.

Name : libidn Relocations: (not relocatable)
Version : 1.18 Vendor: CentOS
Release : 2.el6 Build Date: 2010年08月24日 09時51分25秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b2.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libidn-1.18-2.el6.src.rpm
Size : 567612 License: LGPLv2+ and GPLv3+ and GFDL
Signature : RSA/8, 2011年07月03日 13時36分02秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/libidn/
Summary : Internationalized Domain Name support library
Description :
GNU Libidn is an implementation of the Stringprep, Punycode and
IDNA specifications defined by the IETF Internationalized Domain
Names (IDN) working group, used for internationalized domain
names.

Name : libnih Relocations: (not relocatable)
Version : 1.0.1 Vendor: CentOS
Release : 7.el6 Build Date: 2011年12月08日 02時40分52秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libnih-1.0.1-7.el6.src.rpm
Size : 486830 License: GPLv2
Signature : RSA/SHA1, 2011年12月09日 05時21分23秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://launchpad.net/libnih
Summary : Lightweight application development library
Description :
libnih is a small library for C application development containing functions
that, despite its name, are not implemented elsewhere in the standard library
set.

libnih is roughly equivalent to other C libraries such as glib, except that its
focus is on a small size and intended for applications that sit very low in the
software stack, especially outside of /usr.

Name : libnl Relocations: (not relocatable)
Version : 1.1 Vendor: CentOS
Release : 14.el6 Build Date: 2011年07月20日 03時32分51秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: libnl-1.1-14.el6.src.rpm
Size : 361990 License: LGPLv2
Signature : RSA/SHA1, 2011年09月26日 13時20分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.infradead.org/~tgr/libnl/
Summary : Convenience library for kernel netlink sockets
Description :
This package contains a convenience library to simplify
using the Linux kernel's netlink sockets interface for
network manipulation

Name : libpciaccess Relocations: (not relocatable)
Version : 0.12.1 Vendor: CentOS
Release : 1.el6 Build Date: 2011年12月08日 00時05分46秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libpciaccess-0.12.1-1.el6.src.rpm
Size : 95156 License: MIT
Signature : RSA/SHA1, 2011年12月09日 05時21分42秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://gitweb.freedesktop.org/?p=xorg/lib/libpciaccess.git
Summary : PCI access library
Description :
libpciaccess is a library for portable PCI access routines across multiple
operating systems.

Name : libselinux Relocations: (not relocatable)
Version : 2.0.94 Vendor: CentOS
Release : 5.3.el6 Build Date: 2012年06月22日 16時51分44秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libselinux-2.0.94-5.3.el6.src.rpm
Size : 130088 License: Public Domain
Signature : RSA/SHA1, 2012年06月25日 07時18分41秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.selinuxproject.org
Summary : SELinux library and simple utilities
Description :
Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions. Required for any applications that use the SELinux API.

Name : libselinux-utils Relocations: (not relocatable)
Version : 2.0.94 Vendor: CentOS
Release : 5.3.el6 Build Date: 2012年06月22日 16時51分44秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b8.bsys.dev.centos.org
Group : Development/Libraries Source RPM: libselinux-2.0.94-5.3.el6.src.rpm
Size : 62593 License: Public Domain
Signature : RSA/SHA1, 2012年06月25日 07時18分19秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.selinuxproject.org
Summary : SELinux libselinux utilies
Description :
The libselinux-utils package contains the utilities

Name : libsemanage Relocations: (not relocatable)
Version : 2.0.43 Vendor: CentOS
Release : 4.1.el6 Build Date: 2011年12月08日 08時44分22秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libsemanage-2.0.43-4.1.el6.src.rpm
Size : 203590 License: LGPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時24分28秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.selinuxproject.org
Summary : SELinux binary policy manipulation library
Description :
Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

libsemanage provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.

Name : libsepol Relocations: (not relocatable)
Version : 2.0.41 Vendor: CentOS
Release : 4.el6 Build Date: 2011年12月08日 03時01分09秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b18n2.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libsepol-2.0.41-4.el6.src.rpm
Size : 248680 License: LGPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時24分54秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.selinuxproject.org
Summary : SELinux binary policy manipulation library
Description :
Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.

Name : libss Relocations: (not relocatable)
Version : 1.41.12 Vendor: CentOS
Release : 12.el6 Build Date: 2012年06月22日 17時55分28秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b8.bsys.dev.centos.org
Group : Development/Libraries Source RPM: e2fsprogs-1.41.12-12.el6.src.rpm
Size : 71689 License: MIT
Signature : RSA/SHA1, 2012年06月25日 07時18分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://e2fsprogs.sourceforge.net/
Summary : Command line interface parsing library
Description :
This is libss, a command line interface parsing library, part of e2fsprogs.

This package includes a tool that parses a command table to generate
a simple command-line interface parser, the include files needed to
compile and use it, and the static libs.

It was originally inspired by the Multics SubSystem library.

Name : libssh2 Relocations: (not relocatable)
Version : 1.2.2 Vendor: CentOS
Release : 11.el6_3 Build Date: 2012年07月04日 01時33分38秒
Install Date: 2012年08月26日 15時39分06秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libssh2-1.2.2-11.el6_3.src.rpm
Size : 190698 License: BSD
Signature : RSA/SHA1, 2012年07月06日 00時26分42秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.libssh2.org/
Summary : A library implementing the SSH2 protocol
Description :
libssh2 is a library implementing the SSH2 protocol as defined by
Internet Drafts: SECSH-TRANS(22), SECSH-USERAUTH(25),
SECSH-CONNECTION(23), SECSH-ARCH(20), SECSH-FILEXFER(06)*,
SECSH-DHGEX(04), and SECSH-NUMBERS(10).

Name : libstdc++ Relocations: (not relocatable)
Version : 4.4.6 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 18時45分26秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: gcc-4.4.6-4.el6.src.rpm
Size : 987096 License: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions
Signature : RSA/SHA1, 2012年06月25日 07時17分19秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://gcc.gnu.org
Summary : GNU Standard C++ Library
Description :
The libstdc++ package contains a rewritten standard compliant GCC Standard
C++ Library.

Name : libtirpc Relocations: (not relocatable)
Version : 0.2.1 Vendor: CentOS
Release : 5.el6 Build Date: 2011年12月08日 04時32分04秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libtirpc-0.2.1-5.el6.src.rpm
Size : 172487 License: SISSL and BSD
Signature : RSA/SHA1, 2011年12月09日 05時25分16秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://nfsv4.bullopensource.org/
Summary : Transport Independent RPC Library
Description :
This package contains SunLib's implementation of transport-independent
RPC (TI-RPC) documentation. This library forms a piece of the base of
Open Network Computing (ONC), and is derived directly from the
Solaris 2.3 source.

TI-RPC is an enhanced version of TS-RPC that requires the UNIX System V
Transport Layer Interface (TLI) or an equivalent X/Open Transport Interface
(XTI). TI-RPC is on-the-wire compatible with the TS-RPC, which is supported
by almost 70 vendors on all major operating systems. TS-RPC source code
(RPCSRC 4.0) remains available from several internet sites.

Name : libudev Relocations: (not relocatable)
Version : 147 Vendor: CentOS
Release : 2.42.el6 Build Date: 2012年07月04日 01時07分01秒
Install Date: 2012年08月26日 15時39分06秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: udev-147-2.42.el6.src.rpm
Size : 77267 License: LGPLv2+
Signature : RSA/SHA1, 2012年07月06日 00時28分21秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
Summary : Dynamic library to access udev device information
Description :
This package contains the dynamic library libudev, which provides access
to udev device information, and an interface to search devices in sysfs.

Name : libusb Relocations: (not relocatable)
Version : 0.1.12 Vendor: CentOS
Release : 23.el6 Build Date: 2010年08月23日 03時44分27秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libusb-0.1.12-23.el6.src.rpm
Size : 54440 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 13時40分23秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/libusb/
Summary : A library which allows userspace access to USB devices
Description :
This package provides a way for applications to access USB devices.

Name : libuser Relocations: (not relocatable)
Version : 0.56.13 Vendor: CentOS
Release : 5.el6 Build Date: 2012年04月05日 18時13分36秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Base Source RPM: libuser-0.56.13-5.el6.src.rpm
Size : 1879447 License: LGPLv2+
Signature : RSA/SHA1, 2012年04月05日 18時34分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/libuser/
Summary : A user and group account administration library
Description :
The libuser library implements a standardized interface for manipulating
and administering user and group accounts. The library uses pluggable
back-ends to interface to its data sources.

Sample applications modeled after those included with the shadow password
suite are included.

Name : libutempter Relocations: (not relocatable)
Version : 1.1.5 Vendor: CentOS
Release : 4.1.el6 Build Date: 2010年08月19日 01時14分02秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: libutempter-1.1.5-4.1.el6.src.rpm
Size : 40785 License: LGPLv2
Signature : RSA/8, 2011年07月03日 13時40分33秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.altlinux.org/pub/people/ldv/utempter
Summary : A privileged helper for utmp/wtmp updates
Description :
This library provides interface for terminal emulators such as
screen and xterm to record user sessions to utmp and wtmp files.

Name : libuuid Relocations: (not relocatable)
Version : 2.17.2 Vendor: CentOS
Release : 12.7.el6 Build Date: 2012年06月22日 19時51分03秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b10.bsys.dev.centos.org
Group : Development/Libraries Source RPM: util-linux-ng-2.17.2-12.7.el6.src.rpm
Size : 16304 License: BSD
Signature : RSA/SHA1, 2012年06月25日 07時16分23秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng
Summary : Universally unique ID library
Description :
This is the universally unique ID library, part of util-linux-ng.

The libuuid library generates and parses 128-bit universally unique
id's (UUID's). A UUID is an identifier that is unique across both
space and time, with respect to the space of all UUIDs. A UUID can
be used for multiple purposes, from tagging objects with an extremely
short lifetime, to reliably identifying very persistent objects
across a network.

See also the "uuid" package, which is a separate implementation.

Name : libxml2 Relocations: (not relocatable)
Version : 2.7.6 Vendor: CentOS
Release : 4.el6_2.4 Build Date: 2012年02月22日 20時39分24秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: libxml2-2.7.6-4.el6_2.4.src.rpm
Size : 1771195 License: MIT
Signature : RSA/SHA1, 2012年02月22日 22時35分49秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://xmlsoft.org/
Summary : Library providing XML and HTML support
Description :
This library allows to manipulate XML files. It includes support
to read, modify and write XML and HTML files. There is DTDs support
this includes parsing and validation even with complex DtDs, either
at parse time or later once the document has been modified. The output
can be a simple SAX stream or and in-memory DOM like representations.
In this case one can use the built-in XPath and XPointer implementation
to select subnodes or ranges. A flexible Input/Output mechanism is
available, with existing HTTP and FTP modules and combined to an
URI library.

Name : lldpad Relocations: (not relocatable)
Version : 0.9.43 Vendor: CentOS
Release : 20.el6_3 Build Date: 2012年08月20日 21時30分41秒
Install Date: 2012年08月26日 15時39分06秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: lldpad-0.9.43-20.el6_3.src.rpm
Size : 490150 License: GPLv2
Signature : RSA/SHA1, 2012年08月20日 22時17分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://open-lldp.org
Summary : Intel LLDP Agent
Description :
This package contains the Linux user space daemon and configuration tool for
Intel LLDP Agent with Enhanced Ethernet support for the Data Center.

Name : logrotate Relocations: (not relocatable)
Version : 3.7.8 Vendor: CentOS
Release : 15.el6 Build Date: 2012年06月22日 15時13分14秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: logrotate-3.7.8-15.el6.src.rpm
Size : 84693 License: GPL+
Signature : RSA/SHA1, 2012年06月25日 07時17分10秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/logrotate/
Summary : Rotates, compresses, removes and mails system log files
Description :
The logrotate utility is designed to simplify the administration of
log files on a system which generates a lot of log files. Logrotate
allows for the automatic rotation compression, removal and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly or when the log file gets to a certain size. Normally,
logrotate runs as a daily cron job.

Install the logrotate package if you need a utility to deal with the
log files on your system.

Name : lua Relocations: (not relocatable)
Version : 5.1.4 Vendor: CentOS
Release : 4.1.el6 Build Date: 2010年08月19日 15時15分47秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b3.bsys.dev.centos.org
Group : Development/Languages Source RPM: lua-5.1.4-4.1.el6.src.rpm
Size : 617799 License: MIT
Signature : RSA/8, 2011年07月03日 13時43分34秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.lua.org/
Summary : Powerful light-weight programming language
Description :
Lua is a powerful light-weight programming language designed for
extending applications. Lua is also frequently used as a
general-purpose, stand-alone language. Lua is free software.
Lua combines simple procedural syntax with powerful data description
constructs based on associative arrays and extensible semantics. Lua
is dynamically typed, interpreted from bytecodes, and has automatic
memory management with garbage collection, making it ideal for
configuration, scripting, and rapid prototyping.

Name : lvm2 Relocations: (not relocatable)
Version : 2.02.95 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時28分29秒
Install Date: 2012年08月26日 10時33分35秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Base Source RPM: lvm2-2.02.95-10.el6.src.rpm
Size : 1334713 License: GPLv2
Signature : RSA/SHA1, 2012年06月25日 07時18分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/lvm2
Summary : Userland logical volume management tools
Description :
LVM2 includes all of the support for handling read/write operations on
physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
multiple devices (MD), see mdadd(8) or even loop devices, see
losetup(8)), creating volume groups (kind of virtual disks) from one
or more physical volumes and creating one or more logical volumes
(kind of logical partitions) in volume groups.

Name : lvm2-libs Relocations: (not relocatable)
Version : 2.02.95 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 23時28分29秒
Install Date: 2012年08月26日 10時33分29秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: lvm2-2.02.95-10.el6.src.rpm
Size : 1637264 License: LGPLv2
Signature : RSA/SHA1, 2012年06月25日 07時20分03秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sources.redhat.com/lvm2
Summary : Shared libraries for lvm2
Description :
This package contains shared lvm2 libraries for applications.

Name : m4 Relocations: (not relocatable)
Version : 1.4.13 Vendor: CentOS
Release : 5.el6 Build Date: 2010年11月12日 02時17分34秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b3.bsys.dev.centos.org
Group : Applications/Text Source RPM: m4-1.4.13-5.el6.src.rpm
Size : 560949 License: GPLv3+
Signature : RSA/8, 2011年07月03日 13時44分33秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/m4/
Summary : The GNU macro processor
Description :
A GNU implementation of the traditional UNIX macro processor. M4 is
useful for writing text files which can be logically parsed, and is used
by many programs as part of their build process. M4 has built-in
functions for including files, running shell commands, doing arithmetic,
etc. The autoconf program needs m4 for generating configure scripts, but
not for running configure scripts.

Install m4 if you need a macro processor.

Name : mingetty Relocations: (not relocatable)
Version : 1.08 Vendor: CentOS
Release : 5.el6 Build Date: 2011年09月23日 21時54分56秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Base Source RPM: mingetty-1.08-5.el6.src.rpm
Size : 34586 License: GPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時21分55秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/mingetty/
Summary : A compact getty program for virtual consoles only
Description :
The mingetty program is a lightweight, minimalist getty program for
use only on virtual consoles. Mingetty is not suitable for serial
lines (you should use the mgetty program in that case).

Name : module-init-tools Relocations: (not relocatable)
Version : 3.9 Vendor: CentOS
Release : 20.el6 Build Date: 2012年06月22日 16時31分47秒
Install Date: 2012年08月26日 10時33分21秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: module-init-tools-3.9-20.el6.src.rpm
Size : 1207417 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時18分18秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
Summary : Kernel module management utilities.
Description :
The module-init-tools package includes various programs needed for automatic
loading and unloading of modules under 2.6 and later kernels, as well
as other module management programs. Device drivers and filesystems
are two examples of loaded and unloaded modules.

Name : ncurses Relocations: (not relocatable)
Version : 5.7 Vendor: CentOS
Release : 3.20090208.el6 Build Date: 2010年08月19日 00時42分34秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Base Source RPM: ncurses-5.7-3.20090208.el6.src.rpm
Size : 386379 License: MIT
Signature : RSA/8, 2011年07月03日 13時46分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://invisible-island.net/ncurses/ncurses.html
Summary : Ncurses support utilities
Description :
The curses library routines are a terminal-independent method of
updating character screens with reasonable optimization. The ncurses
(new curses) library is a freely distributable replacement for the
discontinued 4.4 BSD classic curses library.

This package contains support utilities, including a terminfo compiler
tic, a decompiler infocmp, clear, tput, tset, and a termcap conversion
tool captoinfo.

Name : ncurses-base Relocations: (not relocatable)
Version : 5.7 Vendor: CentOS
Release : 3.20090208.el6 Build Date: 2010年08月19日 00時42分34秒
Install Date: 2012年08月26日 10時33分05秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Base Source RPM: ncurses-5.7-3.20090208.el6.src.rpm
Size : 193090 License: MIT
Signature : RSA/8, 2011年07月03日 13時47分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://invisible-island.net/ncurses/ncurses.html
Summary : Descriptions of common terminals
Description :
This package contains descriptions of common terminals. Other terminal
descriptions are included in the ncurses-term package.

Name : ncurses-libs Relocations: (not relocatable)
Version : 5.7 Vendor: CentOS
Release : 3.20090208.el6 Build Date: 2010年08月19日 00時42分34秒
Install Date: 2012年08月26日 10時33分13秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: ncurses-5.7-3.20090208.el6.src.rpm
Size : 760448 License: MIT
Signature : RSA/8, 2011年07月03日 13時47分02秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://invisible-island.net/ncurses/ncurses.html
Summary : Ncurses libraries
Description :
The curses library routines are a terminal-independent method of
updating character screens with reasonable optimization. The ncurses
(new curses) library is a freely distributable replacement for the
discontinued 4.4 BSD classic curses library.

This package contains the ncurses libraries.

Name : net-tools Relocations: (not relocatable)
Version : 1.60 Vendor: CentOS
Release : 110.el6_2 Build Date: 2012年05月10日 17時17分33秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Base Source RPM: net-tools-1.60-110.el6_2.src.rpm
Size : 778085 License: GPL+
Signature : RSA/SHA1, 2012年05月10日 19時02分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://net-tools.berlios.de/
Summary : Basic networking tools
Description :
The net-tools package contains basic networking tools,
including ifconfig, netstat, route, and others.
Most of them are obsolete. For replacement check iproute package.

Name : newt Relocations: (not relocatable)
Version : 0.52.11 Vendor: CentOS
Release : 3.el6 Build Date: 2011年09月24日 01時24分28秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: newt-0.52.11-3.el6.src.rpm
Size : 174037 License: LGPLv2
Signature : RSA/SHA1, 2011年09月26日 13時22分13秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/newt/
Summary : A library for text mode user interfaces
Description :
Newt is a programming library for color text mode, widget based user
interfaces. Newt can be used to add stacked windows, entry widgets,
checkboxes, radio buttons, labels, plain text fields, scrollbars,
etc., to text mode user interfaces. This package also contains the
shared library needed by programs built with newt, as well as a
/usr/bin/dialog replacement called whiptail. Newt is based on the
slang library.

Name : newt-python Relocations: (not relocatable)
Version : 0.52.11 Vendor: CentOS
Release : 3.el6 Build Date: 2011年09月24日 01時24分28秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: newt-0.52.11-3.el6.src.rpm
Size : 111017 License: LGPLv2
Signature : RSA/SHA1, 2011年09月26日 13時22分14秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/newt/
Summary : Python bindings for newt
Description :
The newt-python package contains the Python bindings for the newt library
providing a python API for creating text mode ionterfaces.

Name : nfs-utils Relocations: (not relocatable)
Version : 1.2.3 Vendor: CentOS
Release : 26.el6 Build Date: 2012年06月23日 00時17分57秒
Install Date: 2012年08月26日 10時33分28秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: nfs-utils-1.2.3-26.el6.src.rpm
Size : 997655 License: MIT and GPLv2 and GPLv2+ and BSD
Signature : RSA/SHA1, 2012年06月25日 07時19分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/nfs
Summary : NFS utilities and supporting clients and daemons for the kernel NFS server
Description :
The nfs-utils package provides a daemon for the kernel NFS server and
related tools, which provides a much higher level of performance than the
traditional Linux NFS server used by most users.

This package also contains the showmount program. Showmount queries the
mount daemon on a remote host for information about the NFS (Network File
System) server on the remote host. For example, showmount can display the
clients which are mounted on that host.

This package also contains the mount.nfs and umount.nfs program.

Name : nfs-utils-lib Relocations: (not relocatable)
Version : 1.1.5 Vendor: CentOS
Release : 4.el6 Build Date: 2011年12月08日 05時02分22秒
Install Date: 2012年08月26日 10時33分28秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: nfs-utils-lib-1.1.5-4.el6.src.rpm
Size : 152918 License: BSD
Signature : RSA/SHA1, 2011年12月09日 05時43分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.citi.umich.edu/projects/nfsv4/linux/
Summary : Network File System Support Library
Description :
Support libraries that are needed by the commands and
daemons the nfs-utils rpm.

Name : nspr Relocations: (not relocatable)
Version : 4.9.1 Vendor: CentOS
Release : 2.el6_3 Build Date: 2012年07月18日 03時50分47秒
Install Date: 2012年08月26日 15時38分37秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: nspr-4.9.1-2.el6_3.src.rpm
Size : 273872 License: MPLv2.0
Signature : RSA/SHA1, 2012年07月18日 08時12分47秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/nspr/
Summary : Netscape Portable Runtime
Description :
NSPR provides platform independence for non-GUI operating system
facilities. These facilities include threads, thread synchronization,
normal file and network I/O, interval timing and calendar time, basic
memory management (malloc and free) and shared library linking.

Name : nss Relocations: (not relocatable)
Version : 3.13.5 Vendor: CentOS
Release : 1.el6_3 Build Date: 2012年07月18日 04時12分25秒
Install Date: 2012年08月26日 15時38分37秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: nss-3.13.5-1.el6_3.src.rpm
Size : 2540720 License: MPLv1.1 or GPLv2+ or LGPLv2+
Signature : RSA/SHA1, 2012年07月18日 08時14分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/security/pki/nss/
Summary : Network Security Services
Description :
Network Security Services (NSS) is a set of libraries designed to
support cross-platform development of security-enabled client and
server applications. Applications built with NSS can support SSL v2
and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
v3 certificates, and other security standards.

Name : nss-softokn Relocations: (not relocatable)
Version : 3.12.9 Vendor: CentOS
Release : 11.el6 Build Date: 2011年12月08日 09時27分01秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: nss-softokn-3.12.9-11.el6.src.rpm
Size : 444772 License: MPLv1.1 or GPLv2+ or LGPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時45分21秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/security/pki/nss/
Summary : Network Security Services Softoken Module
Description :
Network Security Services Softoken Cryptographic Module

Name : nss-softokn-freebl Relocations: (not relocatable)
Version : 3.12.9 Vendor: CentOS
Release : 11.el6 Build Date: 2011年12月08日 09時27分01秒
Install Date: 2012年08月26日 10時33分07秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Base Source RPM: nss-softokn-3.12.9-11.el6.src.rpm
Size : 383982 License: MPLv1.1 or GPLv2+ or LGPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時45分19秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/security/pki/nss/
Summary : Freebl library for the Network Security Services
Description :
NSS Softoken Cryptographic Module Freelb Library

Install the nss-softokn-freebl package if you need the freebl
library.

Name : nss-sysinit Relocations: (not relocatable)
Version : 3.13.5 Vendor: CentOS
Release : 1.el6_3 Build Date: 2012年07月18日 04時12分25秒
Install Date: 2012年08月26日 15時38分37秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Base Source RPM: nss-3.13.5-1.el6_3.src.rpm
Size : 32814 License: MPLv1.1 or GPLv2+ or LGPLv2+
Signature : RSA/SHA1, 2012年07月18日 08時14分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/security/pki/nss/
Summary : System NSS Initialization
Description :
Default Operating System module that manages applications loading
NSS globally on the system. This module loads the system defined
PKCS #11 modules for NSS and chains with other NSS modules to load
any system or user configured modules.

Name : nss-tools Relocations: (not relocatable)
Version : 3.13.5 Vendor: CentOS
Release : 1.el6_3 Build Date: 2012年07月18日 04時12分25秒
Install Date: 2012年08月26日 15時38分37秒 Build Host: c6b9.bsys.dev.centos.org
Group : System Environment/Base Source RPM: nss-3.13.5-1.el6_3.src.rpm
Size : 2849608 License: MPLv1.1 or GPLv2+ or LGPLv2+
Signature : RSA/SHA1, 2012年07月18日 08時14分31秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/security/pki/nss/
Summary : Tools for the Network Security Services
Description :
Network Security Services (NSS) is a set of libraries designed to
support cross-platform development of security-enabled client and
server applications. Applications built with NSS can support SSL v2
and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
v3 certificates, and other security standards.

Install the nss-tools package if you need command-line tools to
manipulate the NSS certificate and key database.

Name : nss-util Relocations: (not relocatable)
Version : 3.13.5 Vendor: CentOS
Release : 1.el6_3 Build Date: 2012年07月18日 03時51分47秒
Install Date: 2012年08月26日 15時38分37秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: nss-util-3.13.5-1.el6_3.src.rpm
Size : 154456 License: MPLv1.1 or GPLv2+ or LGPLv2+
Signature : RSA/SHA1, 2012年07月18日 08時15分44秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.mozilla.org/projects/security/pki/nss/
Summary : Network Security Services Utilities Library
Description :
Utilities for Network Security Services and the Softoken module

Name : openldap Relocations: (not relocatable)
Version : 2.4.23 Vendor: CentOS
Release : 26.el6_3.2 Build Date: 2012年08月09日 01時32分28秒
Install Date: 2012年08月26日 15時39分06秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: openldap-2.4.23-26.el6_3.2.src.rpm
Size : 780452 License: OpenLDAP
Signature : RSA/SHA1, 2012年08月09日 03時48分33秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.openldap.org/
Summary : LDAP support libraries
Description :
OpenLDAP is an open source suite of LDAP (Lightweight Directory Access
Protocol) applications and development tools. LDAP is a set of
protocols for accessing directory services (usually phone book style
information, but other information is possible) over the Internet,
similar to the way DNS (Domain Name System) information is propagated
over the Internet. The openldap package contains configuration files,
libraries, and documentation for OpenLDAP.

Name : openssh Relocations: (not relocatable)
Version : 5.3p1 Vendor: CentOS
Release : 81.el6 Build Date: 2012年06月22日 23時20分59秒
Install Date: 2012年08月26日 10時33分28秒 Build Host: c6b8.bsys.dev.centos.org
Group : Applications/Internet Source RPM: openssh-5.3p1-81.el6.src.rpm
Size : 679713 License: BSD
Signature : RSA/SHA1, 2012年06月25日 07時16分20秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.openssh.com/portable.html
Summary : An open source implementation of SSH protocol versions 1 and 2
Description :
SSH (Secure SHell) is a program for logging into and executing
commands on a remote machine. SSH is intended to replace rlogin and
rsh, and to provide secure encrypted communications between two
untrusted hosts over an insecure network. X11 connections and
arbitrary TCP/IP ports can also be forwarded over the secure channel.

OpenSSH is OpenBSD's version of the last free version of SSH, bringing
it up to date in terms of security and features.

This package includes the core files necessary for both the OpenSSH
client and server. To make this package useful, you should also
install openssh-clients, openssh-server, or both.

Name : openssh-clients Relocations: (not relocatable)
Version : 5.3p1 Vendor: CentOS
Release : 81.el6 Build Date: 2012年06月22日 23時20分59秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b8.bsys.dev.centos.org
Group : Applications/Internet Source RPM: openssh-5.3p1-81.el6.src.rpm
Size : 1070245 License: BSD
Signature : RSA/SHA1, 2012年06月25日 07時15分56秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.openssh.com/portable.html
Summary : An open source SSH client applications
Description :
OpenSSH is a free version of SSH (Secure SHell), a program for logging
into and executing commands on a remote machine. This package includes
the clients necessary to make encrypted connections to SSH servers.

Name : openssh-server Relocations: (not relocatable)
Version : 5.3p1 Vendor: CentOS
Release : 81.el6 Build Date: 2012年06月22日 23時20分59秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: openssh-5.3p1-81.el6.src.rpm
Size : 671820 License: BSD
Signature : RSA/SHA1, 2012年06月25日 07時17分57秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.openssh.com/portable.html
Summary : An open source SSH server daemon
Description :
OpenSSH is a free version of SSH (Secure SHell), a program for logging
into and executing commands on a remote machine. This package contains
the secure shell daemon (sshd). The sshd daemon allows SSH clients to
securely connect to your SSH server.

Name : openssl Relocations: (not relocatable)
Version : 1.0.0 Vendor: CentOS
Release : 25.el6_3.1 Build Date: 2012年08月23日 14時01分06秒
Install Date: 2012年08月26日 15時38分38秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: openssl-1.0.0-25.el6_3.1.src.rpm
Size : 3768415 License: OpenSSL
Signature : RSA/SHA1, 2012年08月23日 21時31分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.openssl.org/
Summary : A general purpose cryptography library with TLS implementation
Description :
The OpenSSL toolkit provides support for secure communications between
machines. OpenSSL includes a certificate management tool and shared
libraries which provide various cryptographic algorithms and
protocols.

Name : pam Relocations: (not relocatable)
Version : 1.1.1 Vendor: CentOS
Release : 10.el6_2.1 Build Date: 2012年04月16日 18時05分11秒
Install Date: 2012年08月26日 10時33分21秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Base Source RPM: pam-1.1.1-10.el6_2.1.src.rpm
Size : 2401335 License: BSD and GPLv2+
Signature : RSA/SHA1, 2012年04月16日 18時19分07秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.us.kernel.org/pub/linux/libs/pam/index.html
Summary : An extensible library which provides authentication for applications
Description :
PAM (Pluggable Authentication Modules) is a system security tool that
allows system administrators to set authentication policy without
having to recompile programs that handle authentication.

Name : passwd Relocations: (not relocatable)
Version : 0.77 Vendor: CentOS
Release : 4.el6_2.2 Build Date: 2012年02月22日 20時48分41秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b18n3.bsys.dev.centos.org
Group : System Environment/Base Source RPM: passwd-0.77-4.el6_2.2.src.rpm
Size : 357699 License: BSD or GPLv2+
Signature : RSA/SHA1, 2012年02月22日 22時37分28秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://fedorahosted.org/passwd
Summary : An utility for setting or changing passwords using PAM
Description :
This package contains a system utility (passwd) which sets
or changes passwords, using PAM (Pluggable Authentication
Modules) library.

Name : pciutils-libs Relocations: (not relocatable)
Version : 3.1.4 Vendor: CentOS
Release : 11.el6 Build Date: 2011年12月08日 07時06分51秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: pciutils-3.1.4-11.el6.src.rpm
Size : 48992 License: GPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時53分45秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml
Summary : Linux PCI library
Description :
This package contains a library for inspecting and setting
devices connected to the PCI bus.

Name : pcre Relocations: (not relocatable)
Version : 7.8 Vendor: CentOS
Release : 4.el6 Build Date: 2012年04月04日 00時50分23秒
Install Date: 2012年08月26日 10時33分16秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: pcre-7.8-4.el6.src.rpm
Size : 526140 License: BSD
Signature : RSA/SHA1, 2012年04月04日 01時02分54秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.pcre.org/
Summary : Perl-compatible regular expression library
Description :
Perl-compatible regular expression library.
PCRE has its own native API, but a set of "wrapper" functions that are based on
the POSIX API are also supplied in the library libpcreposix. Note that this
just provides a POSIX calling interface to PCRE: the regular expressions
themselves still follow Perl syntax and semantics. The header file
for the POSIX-style functions is called pcreposix.h.

Name : pinentry Relocations: (not relocatable)
Version : 0.7.6 Vendor: CentOS
Release : 6.el6 Build Date: 2011年09月23日 22時22分05秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b18n1.dev.centos.org
Group : Applications/System Source RPM: pinentry-0.7.6-6.el6.src.rpm
Size : 143708 License: GPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時23分37秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnupg.org/aegypten/
Summary : Collection of simple PIN or passphrase entry dialogs
Description :
Pinentry is a collection of simple PIN or passphrase entry dialogs which
utilize the Assuan protocol as described by the aegypten project; see
http://www.gnupg.org/aegypten/ for details.
This package contains the curses (text) based version of the PIN entry dialog.

Name : plymouth Relocations: (not relocatable)
Version : 0.8.3 Vendor: CentOS
Release : 24.el6.centos Build Date: 2011年12月09日 03時38分06秒
Install Date: 2012年08月26日 10時33分30秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Base Source RPM: plymouth-0.8.3-24.el6.centos.src.rpm
Size : 193924 License: GPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時57分15秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://freedesktop.org/software/plymouth/releases
Summary : Graphical Boot Animation and Logger
Description :
Plymouth provides an attractive graphical boot animation in
place of the text messages that normally get shown. Text
messages are instead redirected to a log file for viewing
after boot.

Name : plymouth-core-libs Relocations: (not relocatable)
Version : 0.8.3 Vendor: CentOS
Release : 24.el6.centos Build Date: 2011年12月09日 03時38分06秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b4.bsys.dev.centos.org
Group : Development/Libraries Source RPM: plymouth-0.8.3-24.el6.centos.src.rpm
Size : 177752 License: GPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時57分23秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://freedesktop.org/software/plymouth/releases
Summary : Plymouth libraries
Description :
This package contains the libply and libply-splash-core libraries
used by Plymouth.

Name : plymouth-scripts Relocations: (not relocatable)
Version : 0.8.3 Vendor: CentOS
Release : 24.el6.centos Build Date: 2011年12月09日 03時38分06秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b4.bsys.dev.centos.org
Group : Applications/System Source RPM: plymouth-0.8.3-24.el6.centos.src.rpm
Size : 11006 License: GPLv2+
Signature : RSA/SHA1, 2011年12月09日 05時57分31秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://freedesktop.org/software/plymouth/releases
Summary : Plymouth related scripts
Description :
This package contains scripts that help integrate Plymouth with
the system.

Name : policycoreutils Relocations: (not relocatable)
Version : 2.0.83 Vendor: CentOS
Release : 19.24.el6 Build Date: 2012年06月22日 20時44分21秒
Install Date: 2012年08月26日 10時33分27秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: policycoreutils-2.0.83-19.24.el6.src.rpm
Size : 3635711 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時15分52秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.selinuxproject.org
Summary : SELinux policy core utilities
Description :
Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

policycoreutils contains the policy core utilities that are required
for basic operation of a SELinux system. These utilities include
load_policy to load policies, setfiles to label filesystems, newrole
to switch roles, and run_init to run /etc/init.d scripts in the proper
context.

Name : popt Relocations: (not relocatable)
Version : 1.13 Vendor: CentOS
Release : 7.el6 Build Date: 2010年08月21日 14時30分58秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b2.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: popt-1.13-7.el6.src.rpm
Size : 83420 License: MIT
Signature : RSA/8, 2011年07月03日 13時57分35秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.rpm5.org/
Summary : C library for parsing command line parameters
Description :
Popt is a C library for parsing command line parameters. Popt was
heavily influenced by the getopt() and getopt_long() functions, but
it improves on them by allowing more powerful argument expansion.
Popt can parse arbitrary argv[] style arrays and automatically set
variables based on command line arguments. Popt allows command line
arguments to be aliased via configuration files and includes utility
functions for parsing arbitrary strings into argv[] arrays using
shell-like rules.

Name : procps Relocations: (not relocatable)
Version : 3.2.8 Vendor: CentOS
Release : 23.el6 Build Date: 2012年04月09日 22時32分04秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/System Source RPM: procps-3.2.8-23.el6.src.rpm
Size : 465943 License: GPLv2+ and LGPLv2+
Signature : RSA/SHA1, 2012年04月09日 22時52分58秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://procps.sourceforge.net
Summary : System and process monitoring utilities
Description :
The procps package contains a set of system utilities that provide
system information. Procps includes ps, free, skill, pkill, pgrep,
snice, tload, top, uptime, vmstat, w, watch and pdwx. The ps command
displays a snapshot of running processes. The top command provides
a repetitive update of the statuses of running processes. The free
command displays the amounts of free and used memory on your
system. The skill command sends a terminate command (or another
specified signal) to a specified set of processes. The snice
command is used to change the scheduling priority of specified
processes. The tload command prints a graph of the current system
load average to a specified tty. The uptime command displays the
current time, how long the system has been running, how many users
are logged on, and system load averages for the past one, five,
and fifteen minutes. The w command displays a list of the users
who are currently logged on and what they are running. The watch
program watches a running program. The vmstat command displays
virtual memory statistics about processes, memory, paging, block
I/O, traps, and CPU activity. The pwdx command reports the current
working directory of a process or processes.

Name : psmisc Relocations: (not relocatable)
Version : 22.6 Vendor: CentOS
Release : 15.el6_0.1 Build Date: 2011年06月25日 15時02分12秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/System Source RPM: psmisc-22.6-15.el6_0.1.src.rpm
Size : 222302 License: GPLv2+
Signature : RSA/8, 2011年07月06日 10時45分24秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sourceforge.net/projects/psmisc
Summary : Utilities for managing processes on your system
Description :
The psmisc package contains utilities for managing processes on your
system: pstree, killall and fuser. The pstree command displays a tree
structure of all of the running processes on your system. The killall
command sends a specified signal (SIGTERM if nothing is specified) to
processes identified by name. The fuser command identifies the PIDs
of processes that are using specified files or filesystems.

Name : pth Relocations: (not relocatable)
Version : 2.0.7 Vendor: CentOS
Release : 9.3.el6 Build Date: 2010年11月12日 04時48分33秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: pth-2.0.7-9.3.el6.src.rpm
Size : 261931 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 13時57分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/pth/
Summary : The GNU Portable Threads library
Description :
Pth is a very portable POSIX/ANSI-C based library for Unix platforms
which provides non-preemptive priority-based scheduling for multiple
threads of execution ("multithreading") inside server applications.
All threads run in the same address space of the server application,
but each thread has it's own individual program-counter, run-time
stack, signal mask and errno variable.

Name : pygpgme Relocations: (not relocatable)
Version : 0.1 Vendor: CentOS
Release : 18.20090824bzr68.el6 Build Date: 2010年08月22日 18時28分16秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b1.bsys.dev.centos.org
Group : Development/Languages Source RPM: pygpgme-0.1-18.20090824bzr68.el6.src.rpm
Size : 251432 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 13時58分12秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://cheeseshop.python.org/pypi/pygpgme/0.1
Summary : Python module for working with OpenPGP messages
Description :
PyGPGME is a Python module that lets you sign, verify, encrypt and decrypt
files using the OpenPGP format. It is built on top of GNU Privacy Guard and
the GPGME library.

Name : python Relocations: (not relocatable)
Version : 2.6.6 Vendor: CentOS
Release : 29.el6_2.2 Build Date: 2012年06月18日 22時21分55秒
Install Date: 2012年08月26日 10時33分25秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Languages Source RPM: python-2.6.6-29.el6_2.2.src.rpm
Size : 21290059 License: Python
Signature : RSA/SHA1, 2012年06月18日 22時47分20秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.python.org/
Summary : An interpreted, interactive, object-oriented programming language
Description :
Python is an interpreted, interactive, object-oriented programming
language often compared to Tcl, Perl, Scheme or Java. Python includes
modules, classes, exceptions, very high level dynamic data types and
dynamic typing. Python supports interfaces to many system calls and
libraries, as well as to various windowing systems (X11, Motif, Tk,
Mac and MFC).

Programmers can write new built-in modules for Python in C or C++.
Python can be used as an extension language for applications that need
a programmable interface. This package contains most of the standard
Python modules, as well as modules for interfacing to the Tix widget
set for Tk and RPM.

Note that documentation for Python is provided in the python-docs
package.

Name : python-iniparse Relocations: (not relocatable)
Version : 0.3.1 Vendor: CentOS
Release : 2.1.el6 Build Date: 2010年08月17日 13時49分21秒
Install Date: 2012年08月26日 10時33分25秒 Build Host: c6b1.bsys.dev.centos.org
Group : Development/Libraries Source RPM: python-iniparse-0.3.1-2.1.el6.src.rpm
Size : 109284 License: MIT
Signature : RSA/8, 2011年07月03日 13時42分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://code.google.com/p/iniparse/
Summary : Python Module for Accessing and Modifying Configuration Data in INI files
Description :
iniparse is an INI parser for Python which is API compatible
with the standard library's ConfigParser, preserves structure of INI
files (order of sections & options, indentation, comments, and blank
lines are preserved when data is updated), and is more convenient to
use.

Name : python-libs Relocations: (not relocatable)
Version : 2.6.6 Vendor: CentOS
Release : 29.el6_2.2 Build Date: 2012年06月18日 22時21分55秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b5.bsys.dev.centos.org
Group : Applications/System Source RPM: python-2.6.6-29.el6_2.2.src.rpm
Size : 1821092 License: Python
Signature : RSA/SHA1, 2012年06月18日 22時47分20秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.python.org/
Summary : The libraries for python runtime
Description :
The python interpreter can be embedded into applications wanting to
use python as an embedded scripting language. The python-libs package
provides the libraries needed for this.

Name : python-pycurl Relocations: (not relocatable)
Version : 7.19.0 Vendor: CentOS
Release : 8.el6 Build Date: 2011年06月25日 17時30分00秒
Install Date: 2012年08月26日 10時33分25秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Languages Source RPM: python-pycurl-7.19.0-8.el6.src.rpm
Size : 236939 License: LGPLv2+ or MIT
Signature : RSA/8, 2011年07月06日 10時45分29秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://pycurl.sourceforge.net/
Summary : A Python interface to libcurl
Description :
PycURL is a Python interface to libcurl. PycURL can be used to fetch
objects identified by a URL from a Python program, similar to the
urllib Python module. PycURL is mature, very fast, and supports a lot
of features.

Name : python-urlgrabber Relocations: (not relocatable)
Version : 3.9.1 Vendor: CentOS
Release : 8.el6 Build Date: 2011年07月20日 02時19分32秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b5.bsys.dev.centos.org
Group : Development/Libraries Source RPM: python-urlgrabber-3.9.1-8.el6.src.rpm
Size : 322193 License: LGPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時13分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://urlgrabber.baseurl.org/
Summary : A high-level cross-protocol url-grabber
Description :
A high-level cross-protocol url-grabber for python supporting HTTP, FTP
and file locations. Features include keepalive, byte ranges, throttling,
authentication, proxies and more.

Name : ql2100-firmware Relocations: (not relocatable)
Version : 1.19.38 Vendor: CentOS
Release : 3.1.el6 Build Date: 2010年08月19日 00時03分16秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: ql2100-firmware-1.19.38-3.1.el6.src.rpm
Size : 78639 License: Redistributable, no modification permitted
Signature : RSA/8, 2011年07月03日 13時43分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.qlogic.com/outgoing/linux/firmware/
Summary : Firmware for qlogic 2100 devices
Description :
Firmware for qlogic 2100 devices.

Name : ql2200-firmware Relocations: (not relocatable)
Version : 2.02.08 Vendor: CentOS
Release : 3.1.el6 Build Date: 2010年08月19日 00時01分18秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: ql2200-firmware-2.02.08-3.1.el6.src.rpm
Size : 86403 License: Redistributable, no modification permitted
Signature : RSA/8, 2011年07月03日 13時43分59秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.qlogic.com/outgoing/linux/firmware/
Summary : Firmware for qlogic 2200 devices
Description :
Firmware for qlogic 2200 devices.

Name : ql23xx-firmware Relocations: (not relocatable)
Version : 3.03.27 Vendor: CentOS
Release : 3.1.el6 Build Date: 2010年08月18日 23時59分16秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: ql23xx-firmware-3.03.27-3.1.el6.src.rpm
Size : 262821 License: Redistributable, no modification permitted
Signature : RSA/8, 2011年07月03日 13時44分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.qlogic.com/outgoing/linux/firmware/
Summary : Firmware for qlogic 23xx devices
Description :
Firmware for qlogic 2300 and 2322 devices.

Name : ql2400-firmware Relocations: (not relocatable)
Version : 5.06.05 Vendor: CentOS
Release : 1.el6 Build Date: 2012年06月22日 16時10分58秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: ql2400-firmware-5.06.05-1.el6.src.rpm
Size : 257163 License: Redistributable, no modification permitted
Signature : RSA/SHA1, 2012年06月25日 07時16分31秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.qlogic.com/outgoing/linux/firmware/
Summary : Firmware for qlogic 2400 devices
Description :
Firmware for qlogic 2400 devices.

Name : ql2500-firmware Relocations: (not relocatable)
Version : 5.06.05 Vendor: CentOS
Release : 1.el6 Build Date: 2012年06月22日 16時11分56秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Kernel Source RPM: ql2500-firmware-5.06.05-1.el6.src.rpm
Size : 254479 License: Redistributable, no modification permitted
Signature : RSA/SHA1, 2012年06月25日 07時16分11秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.qlogic.com/outgoing/linux/firmware/
Summary : Firmware for qlogic 2500 devices
Description :
Firmware for qlogic 2500 devices.

Name : readline Relocations: (not relocatable)
Version : 6.0 Vendor: CentOS
Release : 4.el6 Build Date: 2012年06月22日 15時54分32秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: readline-6.0-4.el6.src.rpm
Size : 433957 License: GPLv3+
Signature : RSA/SHA1, 2012年06月25日 07時18分23秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://cnswww.cns.cwru.edu/php/chet/readline/rltop.html
Summary : A library for editing typed command lines
Description :
The Readline library provides a set of functions that allow users to
edit command lines. Both Emacs and vi editing modes are available. The
Readline library includes additional functions for maintaining a list
of previously-entered command lines for recalling or editing those
lines, and for performing csh-like history expansion on previous
commands.

Name : redhat-logos Relocations: (not relocatable)
Version : 60.0.14 Vendor: CentOS
Release : 12.el6.centos Build Date: 2012年08月16日 19時17分12秒
Install Date: 2012年08月26日 15時39分07秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: redhat-logos-60.0.14-12.el6.centos.src.rpm
Size : 15816517 License: Copyright 1999-2010 the CentOS Project. All rights reserved.
Signature : RSA/SHA1, 2012年08月16日 22時08分49秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://centos.org
Summary : CentOS-related icons and pictures
Description :
The redhat-logos package (the "Package") contains files created by the
CentOS Project to replace the Red Hat "Shadow Man" logo and RPM logo.
The Red Hat "Shadow Man" logo, RPM, and the RPM logo are trademarks or
registered trademarks of Red Hat, Inc.

The Package and CentOS logos (the "Marks") can only used as outlined in
the included COPYING file. Please see that file for information on copying
and redistribution of the CentOS Marks.

Name : rootfiles Relocations: (not relocatable)
Version : 8.1 Vendor: CentOS
Release : 6.1.el6 Build Date: 2010年08月18日 23時50分16秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b3.bsys.dev.centos.org
Group : System Environment/Base Source RPM: rootfiles-8.1-6.1.el6.src.rpm
Size : 599 License: Public Domain
Signature : RSA/8, 2011年07月03日 13時45分28秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
Summary : The basic required files for the root user's directory
Description :
The rootfiles package contains basic required files that are placed
in the root user's account. These files are basically the same
as those in /etc/skel, which are placed in regular
users' home directories.

Name : rpcbind Relocations: (not relocatable)
Version : 0.2.0 Vendor: CentOS
Release : 9.el6 Build Date: 2012年06月22日 18時30分45秒
Install Date: 2012年08月26日 10時33分22秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: rpcbind-0.2.0-9.el6.src.rpm
Size : 97557 License: GPL
Signature : RSA/SHA1, 2012年06月25日 07時17分12秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://nfsv4.bullopensource.org
Summary : Universal Addresses to RPC Program Number Mapper
Description :
The rpcbind utility is a server that converts RPC program numbers into
universal addresses. It must be running on the host to be able to make
RPC calls on a server on that machine.

Name : rpm Relocations: (not relocatable)
Version : 4.8.0 Vendor: CentOS
Release : 27.el6 Build Date: 2012年06月22日 19時40分27秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: rpm-4.8.0-27.el6.src.rpm
Size : 2031045 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時20分09秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.rpm.org/
Summary : The RPM package management system
Description :
The RPM Package Manager (RPM) is a powerful command line driven
package management system capable of installing, uninstalling,
verifying, querying, and updating software packages. Each software
package consists of an archive of files along with information about
the package like its version, a description, etc.

Name : rpm-libs Relocations: (not relocatable)
Version : 4.8.0 Vendor: CentOS
Release : 27.el6 Build Date: 2012年06月22日 19時40分27秒
Install Date: 2012年08月26日 10時33分23秒 Build Host: c6b7.bsys.dev.centos.org
Group : Development/Libraries Source RPM: rpm-4.8.0-27.el6.src.rpm
Size : 772824 License: GPLv2+ and LGPLv2+ with exceptions
Signature : RSA/SHA1, 2012年06月25日 07時18分39秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.rpm.org/
Summary : Libraries for manipulating RPM packages
Description :
This package contains the RPM shared libraries.

Name : rpm-python Relocations: (not relocatable)
Version : 4.8.0 Vendor: CentOS
Release : 27.el6 Build Date: 2012年06月22日 19時40分27秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b7.bsys.dev.centos.org
Group : Development/Libraries Source RPM: rpm-4.8.0-27.el6.src.rpm
Size : 119818 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時16分57秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.rpm.org/
Summary : Python bindings for apps which will manipulate RPM packages
Description :
The rpm-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by RPM Package Manager libraries.

This package should be installed if you want to develop Python
programs that will manipulate RPM packages and databases.

Name : rsyslog Relocations: (not relocatable)
Version : 5.8.10 Vendor: CentOS
Release : 2.el6 Build Date: 2012年06月22日 23時28分36秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Daemons Source RPM: rsyslog-5.8.10-2.el6.src.rpm
Size : 2179064 License: (GPLv3+ and ASL 2.0)
Signature : RSA/SHA1, 2012年06月25日 07時17分49秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.rsyslog.com/
Summary : Enhanced system logging and kernel message trapping daemons
Description :
Rsyslog is an enhanced, multi-threaded syslog daemon. It supports MySQL,
syslog/TCP, RFC 3195, permitted sender lists, filtering on any message part,
and fine grain output format control. It is compatible with stock sysklogd
and can be used as a drop-in replacement. Rsyslog is simple to set up, with
advanced features suitable for enterprise-class, encryption-protected syslog
relay chains.

Name : sed Relocations: (not relocatable)
Version : 4.2.1 Vendor: CentOS
Release : 10.el6 Build Date: 2012年06月22日 22時42分01秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b9.bsys.dev.centos.org
Group : Applications/Text Source RPM: sed-4.2.1-10.el6.src.rpm
Size : 542324 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時20分22秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://sed.sourceforge.net/
Summary : A GNU stream text editor
Description :
The sed (Stream EDitor) editor is a stream or batch (non-interactive)
editor. Sed takes text as input, performs an operation or set of
operations on the text and outputs the modified text. The operations
that sed performs (substitutions, deletions, insertions, etc.) can be
specified in a script file or from the command line.

Name : selinux-policy Relocations: (not relocatable)
Version : 3.7.19 Vendor: CentOS
Release : 155.el6_3 Build Date: 2012年07月04日 01時29分45秒
Install Date: 2012年08月26日 15時38分45秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: selinux-policy-3.7.19-155.el6_3.src.rpm
Size : 9004150 License: GPLv2+
Signature : RSA/SHA1, 2012年07月06日 00時28分06秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://oss.tresys.com/repos/refpolicy/
Summary : SELinux policy configuration
Description :
SELinux Reference Policy - modular.
Based off of reference policy: Checked out revision 2.20091117

Name : selinux-policy-targeted Relocations: (not relocatable)
Version : 3.7.19 Vendor: CentOS
Release : 155.el6_3 Build Date: 2012年07月04日 01時29分45秒
Install Date: 2012年08月26日 15時38分46秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: selinux-policy-3.7.19-155.el6_3.src.rpm
Size : 3194109 License: GPLv2+
Signature : RSA/SHA1, 2012年07月06日 00時28分06秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://oss.tresys.com/repos/refpolicy/
Summary : SELinux targeted base policy
Description :
SELinux Reference policy targeted base module.

Name : setup Relocations: (not relocatable)
Version : 2.8.14 Vendor: CentOS
Release : 16.el6 Build Date: 2012年06月22日 19時08分51秒
Install Date: 2012年08月26日 10時33分04秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: setup-2.8.14-16.el6.src.rpm
Size : 665745 License: Public Domain
Signature : RSA/SHA1, 2012年06月25日 07時16分29秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://fedorahosted.org/setup/
Summary : A set of system configuration and setup files
Description :
The setup package contains a set of important system configuration and
setup files, such as passwd, group, and profile.

Name : shadow-utils Relocations: (not relocatable)
Version : 4.1.4.2 Vendor: CentOS
Release : 13.el6 Build Date: 2011年12月08日 02時17分13秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Base Source RPM: shadow-utils-4.1.4.2-13.el6.src.rpm
Size : 2777471 License: BSD and GPLv2+
Signature : RSA/SHA1, 2011年12月09日 06時15分05秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://pkg-shadow.alioth.debian.org/
Summary : Utilities for managing accounts and shadow password files
Description :
The shadow-utils package includes the necessary programs for
converting UNIX password files to the shadow password format, plus
programs for managing user and group accounts. The pwconv command
converts passwords to the shadow password format. The pwunconv command
unconverts shadow passwords and generates a passwd file (a standard
UNIX password file). The pwck command checks the integrity of password
and shadow files. The lastlog command prints out the last login times
for all users. The useradd, userdel, and usermod commands are used for
managing user accounts. The groupadd, groupdel, and groupmod commands
are used for managing group accounts.

Name : slang Relocations: (not relocatable)
Version : 2.2.1 Vendor: CentOS
Release : 1.el6 Build Date: 2010年08月17日 08時46分40秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b2.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: slang-2.2.1-1.el6.src.rpm
Size : 1800725 License: GPLv2+
Signature : RSA/8, 2011年07月03日 14時02分05秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.jedsoft.org/slang/
Summary : The shared library for the S-Lang extension language
Description :
S-Lang is an interpreted language and a programming library. The
S-Lang language was designed so that it can be easily embedded into
a program to provide the program with a powerful extension language.
The S-Lang library, provided in this package, provides the S-Lang
extension language. S-Lang's syntax resembles C, which makes it easy
to recode S-Lang procedures in C if you need to.

Name : sqlite Relocations: (not relocatable)
Version : 3.6.20 Vendor: CentOS
Release : 1.el6 Build Date: 2010年08月17日 21時56分21秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b2.bsys.dev.centos.org
Group : Applications/Databases Source RPM: sqlite-3.6.20-1.el6.src.rpm
Size : 641020 License: Public Domain
Signature : RSA/8, 2011年07月03日 14時02分22秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.sqlite.org/
Summary : Library that implements an embeddable SQL database engine
Description :
SQLite is a C library that implements an SQL database engine. A large
subset of SQL92 is supported. A complete database is stored in a
single disk file. The API is designed for convenience and ease of use.
Applications that link against SQLite can enjoy the power and
flexibility of an SQL database without the administrative hassles of
supporting a separate database server. Version 2 and version 3 binaries
are named to permit each to be installed on a single host

Name : system-config-firewall-base Relocations: (not relocatable)
Version : 1.2.27 Vendor: CentOS
Release : 5.el6 Build Date: 2011年09月24日 02時04分13秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Base Source RPM: system-config-firewall-1.2.27-5.el6.src.rpm
Size : 2364002 License: GPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時25分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://fedorahosted.org/system-config-firewall
Summary : system-config-firewall base components and command line tool
Description :
Base components of system-config-firewall with lokkit, the command line tool
for basic firewall setup.

Name : sysvinit-tools Relocations: (not relocatable)
Version : 2.87 Vendor: CentOS
Release : 4.dsf.el6 Build Date: 2011年07月19日 16時26分23秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b5.bsys.dev.centos.org
Group : System Environment/Base Source RPM: sysvinit-2.87-4.dsf.el6.src.rpm
Size : 112743 License: GPLv2+
Signature : RSA/SHA1, 2011年09月26日 13時25分50秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : https://alioth.debian.org/projects/pkg-sysvinit/
Summary : Tools used for process and utmp management.
Description :
The sysvinit-tools package contains various tools used for process
management.

Name : tar Relocations: (not relocatable)
Version : 1.23 Vendor: CentOS
Release : 7.el6 Build Date: 2012年06月22日 19時29分43秒
Install Date: 2012年08月26日 10時33分18秒 Build Host: c6b10.bsys.dev.centos.org
Group : Applications/Archiving Source RPM: tar-1.23-7.el6.src.rpm
Size : 2616319 License: GPLv3+
Signature : RSA/SHA1, 2012年06月25日 07時19分02秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gnu.org/software/tar/
Summary : A GNU file archiving program
Description :
The GNU tar program saves many files together in one archive and can
restore individual files (or all of the files) from that archive. Tar
can also be used to add supplemental files to an archive and to update
or list files in the archive. Tar includes multivolume support,
automatic archive compression/decompression, the ability to perform
remote archives, and the ability to perform incremental and full
backups.

If you want to use tar for remote backups, you also need to install
the rmt package.

Name : tcp_wrappers-libs Relocations: (not relocatable)
Version : 7.6 Vendor: CentOS
Release : 57.el6 Build Date: 2011年12月08日 02時45分47秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b4.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: tcp_wrappers-7.6-57.el6.src.rpm
Size : 131475 License: BSD
Signature : RSA/SHA1, 2011年12月09日 06時20分08秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.porcupine.org/pub/security/index.html
Summary : Libraries for tcp_wrappers
Description :
tcp_wrappers-libs contains the libraries of the tcp_wrappers package.

Name : tzdata Relocations: (not relocatable)
Version : 2012c Vendor: CentOS
Release : 3.el6 Build Date: 2012年07月19日 23時44分57秒
Install Date: 2012年08月26日 15時38分26秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: tzdata-2012c-3.el6.src.rpm
Size : 1837864 License: Public Domain
Signature : RSA/SHA1, 2012年07月20日 00時57分32秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://munnari.oz.au/pub/
Summary : Timezone data
Description :
This package contains data files with rules for various timezones around
the world.

Name : udev Relocations: (not relocatable)
Version : 147 Vendor: CentOS
Release : 2.42.el6 Build Date: 2012年07月04日 01時07分01秒
Install Date: 2012年08月26日 15時38分37秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: udev-147-2.42.el6.src.rpm
Size : 1323849 License: GPLv2
Signature : RSA/SHA1, 2012年07月06日 00時28分21秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
Summary : A userspace implementation of devfs
Description :
The udev package contains an implementation of devfs in
userspace using sysfs and netlink.

Name : upstart Relocations: (not relocatable)
Version : 0.6.5 Vendor: CentOS
Release : 12.el6 Build Date: 2012年06月22日 18時50分08秒
Install Date: 2012年08月26日 10時33分17秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: upstart-0.6.5-12.el6.src.rpm
Size : 563633 License: GPLv2 and LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時19分19秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://upstart.ubuntu.com
Summary : An event-driven init system
Description :
Upstart is an event-based replacement for the /sbin/init daemon which
handles starting of tasks and services during boot, stopping them
during shutdown and supervising them while the system is running.

Name : ustr Relocations: (not relocatable)
Version : 1.0.4 Vendor: CentOS
Release : 9.1.el6 Build Date: 2010年08月18日 23時57分46秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b1.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: ustr-1.0.4-9.1.el6.src.rpm
Size : 273983 License: MIT or LGPLv2+ or BSD
Signature : RSA/8, 2011年07月03日 14時04分38秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.and.org/ustr/
Summary : String library, very low memory overhead, simple to import
Description :
Micro string library, very low overhead from plain strdup() (Ave. 44% for
0-20B strings). Very easy to use in existing C code. At it's simplest you can
just include a single header file into your .c and start using it.
This package also distributes pre-built shared libraries.

Name : util-linux-ng Relocations: (not relocatable)
Version : 2.17.2 Vendor: CentOS
Release : 12.7.el6 Build Date: 2012年06月22日 19時51分03秒
Install Date: 2012年08月26日 10時33分27秒 Build Host: c6b10.bsys.dev.centos.org
Group : System Environment/Base Source RPM: util-linux-ng-2.17.2-12.7.el6.src.rpm
Size : 5879333 License: GPLv1+ and GPLv2 and GPLv2+ and LGPLv2+ and MIT and BSD with advertising and Public Domain
Signature : RSA/SHA1, 2012年06月25日 07時16分16秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng
Summary : A collection of basic system utilities
Description :
The util-linux-ng package contains a large variety of low-level system
utilities that are necessary for a Linux system to function. Among
others, Util-linux contains the fdisk configuration tool and the login
program.

Name : vim-minimal Relocations: (not relocatable)
Version : 7.2.411 Vendor: CentOS
Release : 1.8.el6 Build Date: 2012年04月05日 18時18分07秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b6.bsys.dev.centos.org
Group : Applications/Editors Source RPM: vim-7.2.411-1.8.el6.src.rpm
Size : 766050 License: Vim and GPLv2+ and BSD and LGPLv2+ and Open Publication
Signature : RSA/SHA1, 2012年04月05日 18時35分05秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.vim.org/
Summary : A minimal version of the VIM editor
Description :
VIM (VIsual editor iMproved) is an updated and improved version of the
vi editor. Vi was the first real screen-based editor for UNIX, and is
still very popular. VIM improves on vi by adding new features:
multiple windows, multi-level undo, block highlighting and more. The
vim-minimal package includes a minimal version of VIM, which is
installed into /bin/vi for use when only the root partition is
present. NOTE: The online help is only available when the vim-common
package is installed.

Name : which Relocations: (not relocatable)
Version : 2.19 Vendor: CentOS
Release : 6.el6 Build Date: 2011年09月23日 19時47分56秒
Install Date: 2012年08月26日 10時33分19秒 Build Host: c6b18n1.dev.centos.org
Group : Applications/System Source RPM: which-2.19-6.el6.src.rpm
Size : 73004 License: GPLv3
Signature : RSA/SHA1, 2011年09月26日 13時26分13秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.xs4all.nl/~carlo17/which/
Summary : Displays where a particular program in your path is located
Description :
The which command shows the full pathname of a specified program, if
the specified program is in your PATH.

Name : xfsprogs Relocations: (not relocatable)
Version : 3.1.1 Vendor: CentOS
Release : 7.el6 Build Date: 2012年06月22日 16時19分50秒
Install Date: 2012年08月26日 10時33分56秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: xfsprogs-3.1.1-7.el6.src.rpm
Size : 3321171 License: GPL+ and LGPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時17分43秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://oss.sgi.com/projects/xfs/
Summary : Utilities for managing the XFS filesystem
Description :
A set of commands to use the XFS filesystem, including mkfs.xfs.

XFS is a high performance journaling filesystem which originated
on the SGI IRIX platform. It is completely multi-threaded, can
support large files and large filesystems, extended attributes,
variable block sizes, is extent based, and makes extensive use of
Btrees (directories, extents, free space) to aid both performance
and scalability.

Refer to the documentation at http://oss.sgi.com/projects/xfs/
for complete details. This implementation is on-disk compatible
with the IRIX version of XFS.

Name : xz-libs Relocations: (not relocatable)
Version : 4.999.9 Vendor: CentOS
Release : 0.3.beta.20091007git.el6 Build Date: 2010年08月23日 02時12分38秒
Install Date: 2012年08月26日 10時33分15秒 Build Host: c6b6.bsys.dev.centos.org
Group : System Environment/Libraries Source RPM: xz-4.999.9-0.3.beta.20091007git.el6.src.rpm
Size : 214490 License: LGPLv2+
Signature : RSA/8, 2011年07月03日 14時06分49秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://tukaani.org/xz/
Summary : Libraries for decoding LZMA compression
Description :
Libraries for decoding files compressed with LZMA or XZ utils.

Name : yum Relocations: (not relocatable)
Version : 3.2.29 Vendor: CentOS
Release : 30.el6.centos Build Date: 2012年06月23日 04時57分12秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b7.bsys.dev.centos.org
Group : System Environment/Base Source RPM: yum-3.2.29-30.el6.centos.src.rpm
Size : 4718103 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時20分01秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://yum.baseurl.org/
Summary : RPM package installer/updater/manager
Description :
Yum is a utility that can check for and automatically download and
install updated RPM packages. Dependencies are obtained and downloaded
automatically, prompting the user for permission as necessary.

Name : yum-metadata-parser Relocations: (not relocatable)
Version : 1.1.2 Vendor: CentOS
Release : 16.el6 Build Date: 2011年07月20日 03時50分44秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b6.bsys.dev.centos.org
Group : Development/Libraries Source RPM: yum-metadata-parser-1.1.2-16.el6.src.rpm
Size : 58327 License: GPLv2
Signature : RSA/SHA1, 2011年09月26日 13時26分27秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://linux.duke.edu/projects/yum/
Summary : A fast metadata parser for yum
Description :
Fast metadata parser for yum implemented in C.

Name : yum-plugin-fastestmirror Relocations: (not relocatable)
Version : 1.1.30 Vendor: CentOS
Release : 14.el6 Build Date: 2012年06月22日 21時23分05秒
Install Date: 2012年08月26日 10時33分26秒 Build Host: c6b8.bsys.dev.centos.org
Group : System Environment/Base Source RPM: yum-utils-1.1.30-14.el6.src.rpm
Size : 53959 License: GPLv2+
Signature : RSA/SHA1, 2012年06月25日 07時18分56秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://yum.baseurl.org/download/yum-utils/
Summary : Yum plugin which chooses fastest repository from a mirrorlist
Description :
This plugin sorts each repository's mirrorlist by connection speed
prior to downloading packages.

Name : yum-presto Relocations: (not relocatable)
Version : 0.6.2 Vendor: CentOS
Release : 1.el6 Build Date: 2010年08月20日 13時57分04秒
Install Date: 2012年08月26日 10時33分55秒 Build Host: c6b2.bsys.dev.centos.org
Group : Development/Tools Source RPM: yum-presto-0.6.2-1.el6.src.rpm
Size : 65680 License: GPLv2+
Signature : RSA/8, 2011年07月03日 13時55分44秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.lesbg.com/jdieter/presto/
Summary : Presto plugin for yum
Description :
Yum-presto is a plugin for yum that looks for deltarpms rather than rpms
whenever they are available. This has the potential of saving a lot of
bandwidth when downloading updates.

A Deltarpm is the difference between two rpms. If you already have foo-1.0
installed and foo-1.1 is available, yum-presto will download the deltarpm
for foo-1.0 => 1.1 rather than the full foo-1.1 rpm, and then build the full
foo-1.1 package from your installed foo-1.0 and the downloaded deltarpm.

Name : zlib Relocations: (not relocatable)
Version : 1.2.3 Vendor: CentOS
Release : 27.el6 Build Date: 2011年12月08日 02時54分41秒
Install Date: 2012年08月26日 10時33分14秒 Build Host: c6b18n1.dev.centos.org
Group : System Environment/Libraries Source RPM: zlib-1.2.3-27.el6.src.rpm
Size : 152225 License: zlib and Boost
Signature : RSA/SHA1, 2011年12月09日 06時48分00秒, Key ID 0946fca2c105b9de
Packager : CentOS BuildSystem
URL : http://www.gzip.org/zlib/
Summary : The zlib compression and decompression library
Description :
Zlib is a general-purpose, patent-free, lossless data compression
library which is used by many different programs.